| ID | Name | NQF Level | Credits |
|---|
| 5715 | Induction | Level 2 | 1 Credits |
| 5716 | Safety | Level 2 | 4 Credits |
| 5735 | Engineering Drawings | Level 2 | 4 Credits |
| 5736 | Workshop Hand Tools | Level 2 | 4 Credits |
| 5737 | Cutting Machines | Level 2 | 4 Credits |
| 5738 | Power Tools | Level 2 | 4 Credits |
| 5739 | Basic Rigging | Level 2 | 4 Credits |
| 5740 | Turner: Parallel O.D Turning | Level 2 | 4 Credits |
| 5741 | Turner: Parallel I.D Turning | Level 2 | 4 Credits |
| 5742 | Turner: Taper Turning | Level 2 | 4 Credits |
| 5743 | Turner: External V- Thread on a lathe | Level 2 | 4 Credits |
| 5744 | Turner: Final finishing features on a lathe | Level 2 | 4 Credits |
| 5745 | Turner: Grooves on a lathe | Level 2 | 4 Credits |
| 5746 | Turner: Manufacture a shaft with bush and sleeve | Level 2 | 4 Credits |
| 5747 | Clearance acceptance | Level 2 | 0 Credits |
| 5748 | Turner: Internal V-Thread on a Lathe (3) | Level 3 | 4 Credits |
| 5749 | Turner: Internal and external left hand V-Thread on a lathe (3) | Level 3 | 4 Credits |
| 5750 | Turner: External and internal square threads (3) | Level 3 | 4 Credits |
| 5751 | Turner: External and internal ACME and Trapezoidal threads (3) | Level 3 | 4 Credits |
| 5752 | Turner: Milling Faces (3) | Level 3 | 4 Credits |
| 5753 | Turner: Milling Slots (3) | Level 3 | 4 Credits |
| 5754 | Turner: Manufacturing a shaft with key ways and matching nut | Level 3 | 4 Credits |
| 5755 | Turner: External and internal multi-start threads (4) | Level 4 | 0 Credits |
| 5756 | Turner: Polygons (e.g Hexagons, Octagons etc) (4) | Level 4 | 4 Credits |
| 5757 | Turner: Pitch Circle Diameter Methodology (4) | Level 4 | 4 Credits |
| 5758 | Turner: Spur Gears (4) | Level 4 | 4 Credits |
| 5759 | Turner: Manufacturing a shaft with sleeve, multi-start thread and matching nut (4) | Level 4 | 4 Credits |
| 6853 | Assessor & Moderator: Moderate an assessment event | Level 4 | 15 Credits |
| 6855 | Assessor & Moderator: Prepare Learner for assessment | Level 4 | 8 Credits |
| 6856 | Steel Cold Processing: Shot Blast Material | Level 3 | 15 Credits |
| 6857 | Assessor & Moderator: Carry out an integrated assessment | Level 4 | 15 Credits |
| 6858 | Steel Cold Processing: Cut Material | Level 3 | 15 Credits |
| 6859 | Steel Cold Processing: De- Scale Material | Level 3 | 15 Credits |
| 6863 | Steel Cold Processing: Treat Material (Electrolytically) | Level 4 | 12 Credits |
| 6865 | Steel Cold Processing: Treat Material (Chemically) | Level 4 | 12 Credits |
| 6879 | Steel Cold Processing: Batch Anneal Material | Level 4 | 20 Credits |
| 6881 | Steel Cold Processing: Anneal Material (continuous) | Level 4 | 15 Credits |
| 6882 | Foundry: Inspect and prepare patterns | Level 1 | 16 Credits |
| 6896 | Foundry: Select, use and maintain patternmaking tools and measuring equipment | Level 1 | 8 Credits |
| 6898 | Foundry: Prepare Sand | Level 1 | 16 Credits |
| 6899 | Foundry: Operate a Coremaking Machine | Level 1 | 16 Credits |
| 6901 | Foundry: Select, use and care for moulding materials and equipment | Level 1 | 8 Credits |
| 6902 | Foundry: Cast a mould | Level 1 | 20 Credits |
| 6903 | Foundry: Perform Foundry Operation | Level 1 | 20 Credits |
| 6904 | Foundry: Operate Moulding Machine | Level 1 | 20 Credits |
| 6905 | Foundry: Set Cores | Level 1 | 16 Credits |
| 6906 | Foundry: Perform Moulding Operations | Level 1 | 20 Credits |
| 6907 | Foundry: Prepare Charge | Level 1 | 20 Credits |
| 6908 | Foundry: Clean a casting | Level 1 | 8 Credits |
| 6909 | Foundry: Fettle castings | Level 1 | 8 Credits |
| 6911 | Foundry: Perform heat treatment on a casting | Level 1 | 16 Credits |
| 6922 | Liquid Metal Casting: Use Hand Held Oxygen Cutting Lance | Level 2 | 3 Credits |
| 6923 | Foundry: Manufacture a resin pattern | Level 2 | 16 Credits |
| 6925 | Foundry: Analyse Production Sands | Level 2 | 16 Credits |
| 6926 | Foundry: Assemble Cores | Level 2 | 16 Credits |
| 6928 | Foundry: Set up a production machine | Level 2 | 16 Credits |
| 6929 | Foundry: Produce a Mould | Level 2 | 16 Credits |
| 6930 | Foundry: Operate a crucible furnace | Level 2 | 20 Credits |
| 6931 | Liquid Metal Casting:Clean and maintain Metal Casting Area | Level 2 | 1 Credits |
| 6932 | Foundry: Test Molten Metal | Level 2 | 8 Credits |
| 6933 | Foundry: Inspect Castings | Level 2 | 8 Credits |
| 6935 | Foundry: Manufacture three dimensional regular shaped wooden pattern equipment | Level 3 | 40 Credits |
| 6936 | Foundry: Manufacture three dimensional regular shaped metal tooling | Level 3 | 40 Credits |
| 6937 | Liquid Metal casting:Prepare Liquid Metal Transfer Equipment | Level 3 | 8 Credits |
| 6938 | Foundry: Produce Cores by Hand | Level 3 | 16 Credits |
| 6941 | Manufacturing:Prepare Cutting Equipment | Level 3 | 4 Credits |
| 6943 | Liquid Metal Casting:Prepare Auxiliary Systems | Level 3 | 10 Credits |
| 6956 | Foundry: Produce a mould using a loose pattern | Level 3 | 16 Credits |
| 6958 | Finish Continuous Metal Cast Products:Liquid Metal Casting | Level 3 | 5 Credits |
| 6959 | Foundry: Operate a furnace | Level 2 | 20 Credits |
| 6960 | Foundry: Audit Production Process | Level 2 | 20 Credits |
| 6962 | Finish Ingot Cast Products:Liquid Metal Casting | Level 3 | 4 Credits |
| 6963 | Foundry: Test Metals | Level 2 | 20 Credits |
| 6965 | Prepare Ingot Casting Equipment: Liquid metal casting | Level 3 | 4 Credits |
| 6967 | Foundry: Produce a mould by core assembly | Level 4 | 30 Credits |
| 6968 | Foundry: Produce a strickle mould | Level 4 | 30 Credits |
| 6969 | Foundry: Manufacture CAD/CAM Designed Metal Tooling | Level 4 | 40 Credits |
| 6970 | Cast Ingots:Liquid Metal Casting | Level 4 | 24 Credits |
| 6976 | Perform Pre-Casting Checks:Liquid Metal Casting | Level 4 | 4 Credits |
| 6977 | Cast Steel Continuously:Liquid metal casting | Level 4 | 28 Credits |
| 6978 | Electromechanical Manufacture: Dismantle basic components and sub-assemblies | Level 1 | 20 Credits |
| 6979 | Electromechanical Manufacture: Operate pre-set machines | Level 1 | 16 Credits |
| 6980 | Electromechanical Manufacture: Wind/Form basic coils | Level 1 | 20 Credits |
| 6981 | Electromechanical Manufacture: Produce components by operating and monitoring | Level 2 | 20 Credits |
| 6982 | Electromechanical Manufacture: Cut material on a production machine | Level 2 | 16 Credits |
| 6983 | Electromechanical Manufacture: Basic winding / rewind of electro-mechanical components | Level 2 | 30 Credits |
| 6984 | Electromechanical Manufacture: Assemble basic components and sub assemblies | Level 2 | 20 Credits |
| 6986 | Electromechanical Manufacture: Weld / Join Metals | Level 2 | 16 Credits |
| 6987 | Electromechanical Manufacturing: Stack core / Shunt plates | Level 2 | 20 Credits |
| 6988 | Electromechanical Manufacture: Perform Routine Maintenance | Level 2 | 16 Credits |
| 6989 | Stoke Furnace:Ferro-Alloys | Level 2 | 7 Credits |
| 6990 | Control Proportioning:Ferro-Alloys | Level 2 | 8 Credits |
| 6991 | Control Solid Paste Level:Ferro-Alloys | Level 2 | 8 Credits |
| 6992 | Join Electrodes:Ferro-Alloys | Level 2 | 9 Credits |
| 6993 | Electromechanical Manufacture: Wind/Form Complex Coils | Level 3 | 50 Credits |
| 6994 | Electromechanical Manufacture: Coat Material and Components | Level 3 | 30 Credits |
| 6995 | Electromechanical Manufacture: Operate Oil/Heat Plant | Level 3 | 60 Credits |
| 6996 | Electromechanical Manufacture: Assemble Complex Components and Sub Assemblies | Level 3 | 30 Credits |
| 6997 | Electromechanical Manufacture: Dismantle Complex Components and sub-assemblies | Level 3 | 30 Credits |
| 6998 | Handle Molten Material:Ferro Alloys | Level 2 | 0 Credits |
| 6999 | Electromechanical Manufacture: Maintain Electro-Mechanical Machine and Ancillary Components | Level 4 | 60 Credits |
| 7000 | Prepare Casting Equipment:Ferro-Alloys | Level 2 | 6 Credits |
| 7001 | Electromechanical Manufacture: Wind/rewind complex electromechanical components | Level 4 | 40 Credits |
| 7002 | Electromechanical Manufacture: Assess components and sub assemblies | Level 4 | 40 Credits |
| 7003 | Electromechanical Manufacture: Installing/Erecting Electro-Mechanical plant and Ancillary components | Level 4 | 40 Credits |
| 7004 | Cast Molten Metal:Ferro-Alloys | Level 2 | 7 Credits |
| 7005 | Electromechanical Manufacture: Balancing rotating components | Level 4 | 80 Credits |
| 7006 | Electromechanical Manufacture: Operate test plant | Level 4 | 80 Credits |
| 7007 | Prepare Tapfloor:Ferro-Alloys | Level 2 | 7 Credits |
| 7008 | Material Preparation: Prepare conveying equipment | Level 2 | 4 Credits |
| 7009 | Material Preparation: Transfer raw materials | Level 2 | 4 Credits |
| 7011 | Prepare Ladle:Ferro-Alloys | Level 2 | 7 Credits |
| 7012 | Material Preparation: Prepare Scrap | Level 2 | 4 Credits |
| 7013 | Material Preparation: Blend Scrap | Level 2 | 4 Credits |
| 7014 | Material Preparation: Distribute Alloys | Level 2 | 4 Credits |
| 7028 | Material Preparation: Proportion/Blend Raw Materials | Level 3 | 6 Credits |
| 7029 | Maintain Taphole:Ferro-Alloys | Level 2 | 12 Credits |
| 7048 | Metal Service Centres: Package Product | Level 1 | 12 Credits |
| 7049 | Metal Service Centres: Make Pallets | Level 1 | 10 Credits |
| 7050 | Metal Service Centres: Use Lifting Tackle | Level 1 | 6 Credits |
| 7051 | Metal Service Centres: Control and Weigh Vehicles | Level 2 | 5 Credits |
| 7053 | Tap Furnace:Ferro Alloys | Level 2 | 15 Credits |
| 7068 | Produce components by performing horizontal and vertical boring operations:Machining | Level 4 | 0 Credits |
| 7069 | Perform heavy turning operations: Machining | Level 4 | 0 Credits |
| 7070 | Perform internal and external cylindrical engineering grinding operations:Machining | Level 4 | 0 Credits |
| 7072 | Heat treatment of tool steels and surface heat treatment processes for engineering metals:Machining | Level 4 | 0 Credits |
| 7073 | Tool, and die making:Machining | Level 4 | 0 Credits |
| 7074 | Calibrate advanced and complex measuring equipment:Machining | Level 4 | 0 Credits |
| 7090 | Set and operate a CNC machining centre:Machining | Level 4 | 0 Credits |
| 7092 | Set and operate a CNC lathe or milling machine:Machining | Level 4 | 0 Credits |
| 7093 | Carry out balancing procedures: Machining | Level 4 | 0 Credits |
| 7094 | Produce components using precision milling operations:Machining | Level 4 | 0 Credits |
| 7097 | Comply with housekeeping practices | Level 2 | 2 Credits |
| 7099 | Comply with safe working practices | Level 2 | 4 Credits |
| 7101 | Comply with waste reduction practices | Level 2 | 3 Credits |
| 7106 | Conduct minor routine and breakdown maintenance on equipment and machines | Level 2 | 6 Credits |
| 7108 | Maintain a textile quality assurance system | Level 2 | 4 Credits |
| 7110 | Describe and relate to productions sectors, end uses and competitors to the textile industry | Level 2 | 4 Credits |
| 7114 | Maintain positive employer/employee practices | Level 2 | 3 Credits |
| 7117 | Contribute to and improve on the operation of a quality assurance system | Level 4 | 6 Credits |
| 7120 | Monitor and improve employer/employee practices in a textile plant | Level 4 | 4 Credits |
| 7122 | Apply waste regulations and processes to reduce waste in a textile plant | Level 4 | 4 Credits |
| 7124 | Apply safe working practices in a textile plant | Level 4 | 4 Credits |
| 7126 | Apply housekeeping practices in a textile plant | Level 4 | 4 Credits |
| 7129 | Identify materials used to manufacture polymer, fibre, yarn or fabric | Level 2 | 6 Credits |
| 7132 | Identify calculations, terms and concepts | Level 2 | 8 Credits |
| 7134 | Interact with people in textiles processes | Level 2 | 4 Credits |
| 7138 | Reproduce recipes and print paste | Level 2 | 7 Credits |
| 7140 | Start up and shut down a printing process | Level 2 | 25 Credits |
| 7144 | Start up and shut down a dyeing process | Level 2 | 25 Credits |
| 7148 | Start up and shut down a spinning process | Level 2 | 16 Credits |
| 7149 | Start up and shut down a non-woven process | Level 2 | 20 Credits |
| 7154 | Start up and shut down a knitting process | Level 2 | 20 Credits |
| 7156 | Start up and shut down a weaving process | Level 2 | 20 Credits |
| 7157 | Monitor and maintain a polymer manufacturing | Level 2 | 20 Credits |
| 7165 | Start up and shut down a warping and sizing process | Level 2 | 12 Credits |
| 7168 | Classify raw materials in grades | New Level Assignment Pending | 40 Credits |
| 7171 | Promote employer/employee relationships in a textile plant | New Level Assignment Pending | 40 Credits |
| 7173 | Plan and implement a waste management system | New Level Assignment Pending | 40 Credits |
| 7176 | Describe material flow in the manufacture of textiles | Level 4 | 4 Credits |
| 7178 | Lead teams in textile processes | Level 4 | 7 Credits |
| 7180 | Draw up and maintain a production plan for a particular area of specialisation in the textile industry | New Level Assignment Pending | 40 Credits |
| 7183 | Design a quality assurance system for a particular area of specialisation in the textile industry | New Level Assignment Pending | 48 Credits |
| 7198 | Relate a specific area of work to the textile industry | Level 4 | 4 Credits |
| 7200 | Monitor and maintain printing processes | Level 4 | 20 Credits |
| 7202 | Monitor and maintain dyeing processes | Level 4 | 20 Credits |
| 7208 | Complete a product change over in a spinning preparation process | Level 4 | 15 Credits |
| 7218 | Complete a product change in a spinning process | Level 4 | 15 Credits |
| 7220 | Monitor and maintain a spinning process | Level 4 | 10 Credits |
| 7229 | Complete a product change over in a non-woven process | Level 4 | 30 Credits |
| 7232 | Complete a product change over in a knitting process | Level 4 | 30 Credits |
| 7235 | Complete a product change over in a weaving process | Level 4 | 30 Credits |
| 7238 | Monitor and maintain a non-woven process | Level 4 | 20 Credits |
| 7241 | Monitor and maintain a knitting process | Level 4 | 20 Credits |
| 7243 | Monitor and maintain a weaving process | Level 4 | 20 Credits |
| 7245 | Monitor and maintain a warping and sizing process | Level 4 | 15 Credits |
| 7248 | Cut, bale and weigh fibres | Level 2 | 12 Credits |
| 7249 | Prepare additives for manufacture of polymers and fibres | Level 2 | 12 Credits |
| 7251 | Monitor and maintain fibre finishing processes | Level 2 | 20 Credits |
| 7253 | Monitor and maintain polymer preparation processes | Level 2 | 20 Credits |
| 7256 | Monitor and maintain an extrusion process to manufacture fibre | Level 2 | 20 Credits |
| 7260 | Create new textile products in a man made fibre process | New Level Assignment Pending | 40 Credits |
| 7269 | Create new textile products in a dry process | New Level Assignment Pending | 40 Credits |
| 7270 | Create new textile products in a wet process | New Level Assignment Pending | 40 Credits |
| 7271 | Modify and develop processes to enhance the man made fibre process | New Level Assignment Pending | 30 Credits |
| 7273 | Modify and develop processes to enhance the dry process | New Level Assignment Pending | 30 Credits |
| 7279 | Modify and develop processes to enhance the wet process | New Level Assignment Pending | 30 Credits |
| 7284 | Set and adjust complex parameters to a man made fibre process | New Level Assignment Pending | 30 Credits |
| 7285 | Set and adjust complex parameters to a dry process | New Level Assignment Pending | 30 Credits |
| 7287 | Set and adjust complex parameters to a wet process | New Level Assignment Pending | 30 Credits |
| 7289 | Complete a product change over to a polymer preparation process | Level 4 | 30 Credits |
| 7293 | Complete a product change over to a fibre finishing process | Level 4 | 30 Credits |
| 7302 | Complete a product change over of an extrusion process | Level 4 | 30 Credits |
| 7307 | Complete a product change over to polymer manufacturing processes | Level 4 | 30 Credits |
| 7309 | Develop and adjust additives for the manufacture of polymers and fibres | Level 4 | 10 Credits |
| 7312 | Start up and shut down a fibre finishing process | Level 4 | 20 Credits |
| 7315 | Start up and shut down a polymer preparation process | Level 4 | 20 Credits |
| 7317 | Start up and shut down an extrusion process to manufacture fibres | Level 4 | 20 Credits |
| 7323 | Start up and shut down a polymer manufacturing process | Level 4 | 20 Credits |
| 7326 | Make up screens for printing | Level 4 | 10 Credits |
| 7328 | Develop recipes and print colouration | Level 4 | 6 Credits |
| 7329 | Complete a change over in a printing process | Level 4 | 20 Credits |
| 7331 | Complete a product change over in a dyeing process | Level 4 | 20 Credits |
| 7427 | Use and maintain hand tools and equipment | Level 2 | 3 Credits |
| 9266 | Install self propelled transport refrigeration systems | Level 2 | 4 Credits |
| 9267 | Demonstrate knowledge of the definitions and sections 1, 8, 13 and 14 of the OHS Act applicable to employees in the air-conditioning, refrigeration and ventilation industries | Level 2 | 3 Credits |
| 9268 | Manage basic personal finance | Level 2 | 6 Credits |
| 9322 | Work in a team | Level 2 | 3 Credits |
| 9328 | Behave in the proper manner under working conditions | Level 2 | 4 Credits |
| 9329 | Identify, use and maintain tools used in the air-conditioning, refrigeration and ventilation trades | Level 3 | 10 Credits |
| 9330 | Fault-find a refrigeration plant stoppage or failure | Level 3 | 5 Credits |
| 9388 | Explain the operation of the vapour compression refrigeration cycle, and identify and explain the operation of the components and the associated controls, safety devices and defros | Level 3 | 14 Credits |
| 9389 | Join and install refrigerant piping | Level 3 | 9 Credits |
| 9390 | Dismantle and assemble air-conditioning and refrigeration equipment | Level 3 | 6 Credits |
| 9391 | Interpret basic (simplex) electrical diagrams and connect single-phase equipment and components used in air-conditioning, refrigeration and ventilation systems | Level 3 | 6 Credits |
| 9392 | Use and maintain refrigeration trade service tools and instruments | Level 3 | 6 Credits |
| 9393 | Install and service power transmission systems for air-conditioning, refrigeration and ventilation equipment | Level 3 | 6 Credits |
| 9394 | Remove, install and service bearings used on air-conditioning, refrigeration and ventilation equipment | Level 3 | 6 Credits |
| 9396 | Handle and place in position equipment used within the air-conditioning, refrigeration and ventilation industries | Level 3 | 4 Credits |
| 9397 | Determine, define and evaluate operating parameters of a refrigeration system and transfer refrigerant | Level 3 | 5 Credits |
| 9402 | Demonstrate knowledge of the OHS Act as it applies to employers and employees in the air-conditioning, refrigeration and ventilation industries | New Level Assignment Pending | 5 Credits |
| 9403 | Demonstrate knowledge of water reticulation systems for air-conditioning and refrigeration installations | New Level Assignment Pending | 8 Credits |
| 9404 | Select refrigerant pipe sizes, plan piping layout and determine system pressure losses | New Level Assignment Pending | 5 Credits |
| 9405 | Analyse work requirements and plan ahead | New Level Assignment Pending | 4 Credits |
| 9406 | Manage a team | New Level Assignment Pending | 4 Credits |
| 9408 | Identify, use and maintain hand tools and measuring instruments used in the air-conditioning, refrigeration and ventilation trades | Level 2 | 16 Credits |
| 9409 | Identify, use and maintain refrigeration trade specific tools and instruments | Level 2 | 8 Credits |
| 9410 | Identify electrical cables and electrical components used in the air-conditioning, refrigeration and ventilation trades | Level 2 | 5 Credits |
| 9411 | Explain the operation of basic vapour compression refrigeration systems, and identify and explain the function of its components and accessories as well as their retrieval and stor | Level 2 | 14 Credits |
| 9412 | Identify materials, piping, fitting, jointing methods and insulation materials used for air-conditioning and refrigeration installations | Level 2 | 5 Credits |
| 9413 | Identify refrigerant containers, explain handling procedures and discuss the use of refrigerants | Level 2 | 6 Credits |
| 9422 | Identify & state the application of belt drives, couplings, gearboxes & bearings used on air-conditioning, refrigeration & ventilation plants & recognize misaligned, mismatched & w | Level 2 | 8 Credits |
| 9423 | Identify and apply fixing methods for piping, ducting and equipment used in the trade of air-conditioning, refrigeration and ventilation | Level 2 | 9 Credits |
| 9443 | Work safely and use safety equipment | Level 2 | 7 Credits |
| 9444 | Demonstrate knowledge of the refrigeration system operating on ammonia | New Level Assignment Pending | 15 Credits |
| 9446 | Calculate the energy cost to run air-conditioning, refrigeration and ventilation plants | New Level Assignment Pending | 5 Credits |
| 9447 | Design air distribution systems for air-conditioning and ventilation systems | New Level Assignment Pending | 10 Credits |
| 9449 | Select and specify vibration control systems for air-conditioning, refrigeration and ventilation systems | New Level Assignment Pending | 10 Credits |
| 9451 | Design hot and cold water reticulation systems for air-conditioning and refrigeration applications | New Level Assignment Pending | 10 Credits |
| 9453 | Select and specify types of refrigeration systems | New Level Assignment Pending | 8 Credits |
| 9456 | Select types of air-conditioning systems | New Level Assignment Pending | 10 Credits |
| 9457 | Analyse the refrigeration cycle with the air of the Pressure Enthalpy diagram and refrigerant tables | New Level Assignment Pending | 7 Credits |
| 9458 | Engineer a building management system for air-conditioning, refrigeration or ventilation installations | New Level Assignment Pending | 10 Credits |
| 9459 | Commission a building management system for an air-conditioning, refrigeration or ventilation installation | New Level Assignment Pending | 8 Credits |
| 9460 | Calculate the cooling requirements for cold and freezer rooms for short term and long term storage of consumables | New Level Assignment Pending | 6 Credits |
| 9461 | Calculate the cooling requirements for air-conditioning applications | New Level Assignment Pending | 8 Credits |
| 9462 | Plot the multi-stage refrigeration cycle on a Pressure-enthalpy diagram, explain its operation and carry out performance calculations | New Level Assignment Pending | 6 Credits |
| 9465 | Demonstrate knowledge of building construction and building services required for air-conditioning, refrigeration and ventilation technicians to co-ordinate services with other dis | New Level Assignment Pending | 4 Credits |
| 9466 | Design simplex refrigeration systems | New Level Assignment Pending | 15 Credits |
| 9467 | Compile and appraise control sequence diagrams for control systems as applied to air-conditioning, refrigeration or ventilation installations | New Level Assignment Pending | 6 Credits |
| 9468 | Demonstrate knowledge of the absorption refrigeration cycle | New Level Assignment Pending | 10 Credits |
| 9482 | Supervise workers at levels 2 and 3 | Level 4 | 6 Credits |
| 9502 | Write a technical report | Level 4 | 4 Credits |
| 9503 | Understand, implement, maintain and monitor general quality standards within the air-conditioning, refrigeration and ventilation industries | Level 4 | 8 Credits |
| 9504 | Commission and maintain transport refrigeration systems | Level 4 | 8 Credits |
| 9505 | Manage basic business and personal finance | Level 4 | 6 Credits |
| 9506 | Communicate in an assertive manner with clients and fellow workers | Level 4 | 4 Credits |
| 9508 | Interpret electrical power & control circuit diagrams and fault find and repair electrical circuits related to air-conditioning, refrigeration and ventilation installations | Level 4 | 11 Credits |
| 9509 | Service a refrigeration system and set it in operation | Level 4 | 8 Credits |
| 9511 | Diagnose operational faults in refrigeration systems and take remedial action or propose corrective action | Level 4 | 6 Credits |
| 9515 | List, define and discuss the characteristics of commonly used refrigerants used in the refrigeration industry | Level 4 | 4 Credits |
| 9516 | Plot air-conditioning processes on the psychometric chart and determine plant operating parameters | Level 4 | 7 Credits |
| 9517 | Commission refrigeration systems | Level 4 | 8 Credits |
| 9518 | Monitor an air-conditioning, refrigeration or ventilation system through the Building Management System | Level 4 | 8 Credits |
| 9520 | Explain function and operation of refrigeration circuits as applied to air-conditioning or refrigeration systems and select and explain the function of components, accessories and | Level 4 | 8 Credits |
| 9521 | Repair and overhaul air-conditioning, refrigeration and ventilation equipment | Level 4 | 8 Credits |
| 9522 | Commission air-conditioning and ventilation systems | Level 4 | 8 Credits |
| 9523 | Explain the need for water treatment and the methods and equipment used | Level 4 | 4 Credits |
| 9525 | Demonstrate knowledge of the OHS Act as it affects experienced workers in the air conditioning, refrigeration and ventilation industries | Level 3 | 4 Credits |
| 9526 | Manage basic business finance | Level 3 | 6 Credits |
| 9527 | Lead a team, plan, allocate and assess their work | Level 3 | 4 Credits |
| 9528 | Communicate with clients | Level 3 | 3 Credits |
| 9529 | Compile feasibility and commissioning reports | Level 3 | 3 Credits |
| 9531 | Show understanding of diversity in the workplace | Level 3 | 3 Credits |
| 9533 | Use communication skills to handle and resolve conflict in the workplace | Level 3 | 3 Credits |
| 9534 | Determine the properties of air from a psychometric chart and carry out basic calculation involving heat and mass transfer | Level 3 | 7 Credits |
| 9535 | Identify, handle and sample refrigeration oils for analysis, and demonstrate how oil can indicate the general condition of a refrigeration system | Level 3 | 3 Credits |
| 9536 | Identify water piping systems, its components, accessories and controls used refrigeration and air conditioning installations | Level 3 | 4 Credits |
| 9538 | Identify and apply insulation methods and materials for piping and flat surfaces as applicable to air-conditioning and refrigeration systems | Level 3 | 6 Credits |
| 9539 | List the commonly applied air-conditioning systems, state their application and explain their operation | Level 3 | 8 Credits |
| 9540 | Carry out elementary airflow measurements and calculations | Level 3 | 4 Credits |
| 9541 | Maintain safety in the handling of hydrocarbon refrigerants | Level 3 | 12 Credits |
| 9542 | Maintain safety in the handling of ammonia refrigerant | Level 3 | 8 Credits |
| 9543 | Supply and fit air conditioners to vehicles | Level 3 | 6 Credits |
| 9544 | Check and maintain air-conditioners in vehicles | Level 3 | 4 Credits |
| 9545 | Diagnose and repair air-conditioners in vehicles | Level 3 | 4 Credits |
| 9546 | Install externally powered transport refrigeration systems | Level 3 | 6 Credits |
| 9608 | Test and monitor for basic gases in an underground coal mine | Level 2 | 7 Credits |
| 9609 | Support roof using a roofbolter in an underground coal mine | Level 2 | 13 Credits |
| 9649 | Introduction to the jewellery workshop | Level 2 | 25 Credits |
| 9662 | Mix refractory mortar and concrete | Level 2 | 0 Credits |
| 9666 | Manage the implementation of a monitoring program to determine geotechnical rock mass behaviour for excavation design purposes | New Level Assignment Pending | 32 Credits |
| 9667 | Develop and manufacture from drawings | Level 2 | 0 Credits |
| 9669 | Manufacture from drawings | Level 2 | 0 Credits |
| 9670 | Use hand held power tools | Level 2 | 0 Credits |
| 9671 | Use handtools | Level 2 | 0 Credits |
| 9673 | Operate machines | Level 2 | 0 Credits |
| 9674 | Select, install, connect and commission three phase ac machines | Level 2 | 0 Credits |
| 9675 | Prepare and produce products on a production machine | Level 2 | 0 Credits |
| 9677 | Select,use and maintain basic measuring equipment | Level 2 | 0 Credits |
| 9728 | Deposit tailings onto an impoundment-type dam | Level 2 | 7 Credits |
| 9773 | Make a complete bottom on sawn diamond gemstones | Level 2 | 18 Credits |
| 9774 | Prepare and polish tables on makeable diamond gemstones | Level 2 | 5 Credits |
| 9775 | Polish top halves on sawn diamond gemstones | Level 2 | 4 Credits |
| 9776 | Make complete tops on makeable diamond gemstones | Level 2 | 9 Credits |
| 9777 | Polish stars on makeable diamond gemstones | Level 2 | 2 Credits |
| 9778 | Prepare and polish tables on sawn diamond gemstones | Level 2 | 5 Credits |
| 9779 | Bottom block sawn diamond gemstones | Level 2 | 8 Credits |
| 9782 | Make complete bottoms on makeable diamond gemstones | Level 2 | 18 Credits |
| 9784 | Bottom lap makeable diamond gemstones | Level 2 | 6 Credits |
| 9785 | Polish bottom halves on makeable diamond gemstones | Level 2 | 4 Credits |
| 9786 | Make complete tops on sawn diamond gemstones | Level 2 | 13 Credits |
| 9787 | Top block sawn diamond gemstones | Level 2 | 7 Credits |
| 9788 | Top lap sawn diamond gemstones | Level 2 | 5 Credits |
| 9789 | Polish stars on sawn diamond gemstones | Level 2 | 4 Credits |
| 9790 | Top block makeable diamond gemstones | Level 2 | 7 Credits |
| 9791 | Top Lap makeable diamond gemstones | Level 2 | 3 Credits |
| 9792 | Polish top halves on makeable diamond gemstones | Level 2 | 4 Credits |
| 10446 | Install radio controlled customer equipment | Level 4 | 12 Credits |
| 10455 | Demonstrate a basic understanding of cement manufacturing | Level 2 | 2 Credits |
| 10472 | Demonstrate a basic understanding of lime manufacturing | Level 2 | 2 Credits |
| 10481 | Crush materials by means of primary crushing | Level 2 | 8 Credits |
| 10483 | Produce fine aggregates in a sand plant | Level 2 | 15 Credits |
| 10484 | Demonstrate a basic understanding of the aggregates industry | Level 2 | 2 Credits |
| 10490 | Carry out secondary breaking by mechanical means | Level 2 | 8 Credits |
| 10497 | Describe and identify the characteristics of diamond gemstones | Level 2 | 10 Credits |
| 10506 | Use a computer to design, mark and check diamond gemstones for parting | Level 2 | 2 Credits |
| 10509 | Part diamond gemstones by means of laser cutting | Level 2 | 16 Credits |
| 10515 | Prepare and set up a bench for polishing diamond gemstones | Level 2 | 6 Credits |
| 10516 | Set up a bench and level a scaiffe for polishing diamond gemstones | Level 2 | 2 Credits |
| 10517 | Prepare a scaiffe for polishing diamond gemstones | Level 2 | 2 Credits |
| 10518 | Level tangs for polishing diamond gemstones | Level 1 | 2 Credits |
| 10519 | Set diamond gemstones for polishing using the press pot system | Level 2 | 3 Credits |
| 10529 | Block and polish diamond gemstones using automatic machinery | Level 2 | 9 Credits |
| 10531 | Collect and return equipment for repair or refurbishment | Level 2 | 2 Credits |
| 10535 | Separate material by means of a hydrosizer | Level 2 | 4 Credits |
| 10539 | Generate hot gas by means of a fluidized-bed process | Level 3 | 5 Credits |
| 10541 | Direct the operation of an overhead crane | Level 2 | 3 Credits |
| 10543 | Produce sulphuric acid by means of absorption | Level 2 | 5 Credits |
| 10544 | Clean sulphur dioxide gas by means of a mist electrostatic precipitator | Level 2 | 3 Credits |
| 10551 | Install and remove ventilation columns and accessories | Level 2 | 2 Credits |
| 10553 | Install pre-stressed elongated support | Level 2 | 2 Credits |
| 10555 | Support an underground workplace by means of grout packs | Level 2 | 2 Credits |
| 10556 | Install tendon support by means of a Roofbolter | Level 2 | 4 Credits |
| 10558 | Haul and dump material using On Highway Articulated Dump Truck with mass not exceeding 25 000 Kg | Level 2 | 10 Credits |
| 10559 | Haul and dump material using Off Highway Articulated Dump Truck | Level 2 | 10 Credits |
| 10561 | Haul and dump material using On Highway Rigid Body Rear Dumper with mass not exceeding 16 000 kg | Level 2 | 10 Credits |
| 10563 | Haul and dump material using On Highway Rigid Body Rear Dumper with mass exceeding 16 000 Kg | Level 2 | 10 Credits |
| 10565 | Haul and dump material using Off Highway Rigid Body Rear Dumper with mass not exceeding 16 000 Kg | Level 2 | 10 Credits |
| 10566 | Haul and dump material using Off Highway Rigid Body Rear Dumper with mass exceeding 16 000 Kg | Level 2 | 10 Credits |
| 10569 | Move Trailing Cable using Cable Reeler | Level 2 | 8 Credits |
| 10607 | Install a distribution board | Level 2 | 2 Credits |
| 10619 | Isolate and restore power to an electrical system | Level 2 | 2 Credits |
| 10673 | Comply with Electrical Safety Standards in a Process Plant | Level 3 | 1 Credits |
| 10726 | Connect a flameproof plug to a trailing cable | Level 2 | 3 Credits |
| 11016 | Doze material using a Track Dozer with mass exceeding 30 000 kg | Level 2 | 16 Credits |
| 11017 | Drill holes using Large Diameter Rotary Drill exceeding 170 mm | Level 2 | 12 Credits |
| 11018 | Operate a Skid Steer Loader | Level 1 | 4 Credits |
| 11020 | Haul and dump material using Electra-Haul Wheel Type Rigid Body Rear Dumper | Level 2 | 21 Credits |
| 11026 | Pump water using a Submersible De-watering Pump | Level 1 | 1 Credits |
| 11035 | Dissolve a sample by means of pressure dissolution | Level 2 | 5 Credits |
| 11062 | Off-load xanthate from a tanker into a bulk storage facility | Level 2 | 4 Credits |
| 11063 | Off-load ammonia from a tanker into a bulk storage facility | Level 2 | 4 Credits |
| 11064 | Off-load pulp from a tanker into a storage facility | Level 2 | 2 Credits |
| 11065 | Load carbon from a storage facility into a road tanker | Level 2 | 6 Credits |
| 11079 | Generate hot gas by means of a grate stoker | Level 2 | 3 Credits |
| 11083 | Clean gas by means of a dry electrostatic precipitator | Level 2 | 4 Credits |
| 11090 | Handle liquid cyanide safely in a metallurgical plant | Level 2 | 8 Credits |
| 11130 | Determine the azimuth of a survey base line by means of a gyro theodolite | New Level Assignment Pending | 11 Credits |
| 11453 | Install pre-formed refractories | Level 3 | 5 Credits |
| 11662 | Transfer fluid by means of a positive displacement pump | Level 2 | 2 Credits |
| 11945 | Operate Steam Turbine Feedwater Storage, Heating and Pumping Systems | Level 3 | 12 Credits |
| 12190 | Log borehole core to obtain geological information on the depositional environment in a coal deposit | Level 2 | 12 Credits |
| 12203 | Demonstrate knowledge of issues relating to HIV and AIDS | Level 1 | 2 Credits |
| 12204 | Use wastewater/sewage, effluent and storm water systems in industry | Level 1 | 2 Credits |
| 12208 | Perform lubrication on production machinery | Level 2 | 3 Credits |
| 12209 | Select and use basic hand tools and materials | Level 1 | 4 Credits |
| 12393 | Set up production machines | Level 3 | 0 Credits |
| 12667 | Supply raw and processed material to production line | Level 2 | 3 Credits |
| 12668 | Read and react to machine control variables | Level 2 | 4 Credits |
| 12676 | Start up and shut down a spinning preparation process | Level 2 | 16 Credits |
| 12714 | Monitor and maintain a spinning preparation process | Level 4 | 10 Credits |
| 13306 | Clean air-conditioning, refrigeration and ventilation plants, components and work sites | Level 2 | 4 Credits |
| 13374 | Interpret air-conditioning, refrigeration and ventilation plant layout and component drawings, sketches and specifications | Level 3 | 6 Credits |
| 13378 | Operate water treatment systems used in air-conditioning and refrigeration installations | Level 3 | 3 Credits |
| 13394 | Install eutectic and multi-compartment transport refrigeration systems | Level 3 | 10 Credits |
| 13395 | Draw free hand diagrams of typical electrical control and power circuits used in air-conditioning, refrigeration and ventilation systems and explain their operating sequence | Level 4 | 10 Credits |
| 13454 | Demonstrate knowledge of the OHS Act applicable to technicians employed in the air-conditioning, refrigeration and ventilation industries | Level 4 | 4 Credits |
| 13474 | Compile an operating and maintenance manual for an air-conditioning, refrigeration or ventilation installation | New Level Assignment Pending | 8 Credits |
| 13475 | Compile a commissioning and test report for an air-conditioning , refrigeration or ventilation installation | New Level Assignment Pending | 6 Credits |
| 13476 | Select power transmission systems and accessories for air-conditioning, refrigeration and ventilation equipment | New Level Assignment Pending | 6 Credits |
| 13477 | Demonstrate knowledge of noise control in air-conditioning, refrigeration and ventilation systems | New Level Assignment Pending | 10 Credits |
| 13478 | Demonstrate knowledge of economics as applied to the selection of air-conditioning, refrigeration or ventilation installations | New Level Assignment Pending | 8 Credits |
| 13479 | Demonstrate knowledge of air filtration systems as used in air-conditioning and ventilation systems | New Level Assignment Pending | 6 Credits |
| 13480 | Demonstrate knowledge of capacity control systems as used in air-conditioning, refrigeration and ventilation systems | New Level Assignment Pending | 6 Credits |
| 13781 | Release entrapped passengers from immobile lift | Level 4 | 4 Credits |
| 14092 | Understand and apply technological knowledge and skills in systems and control | Level 1 | 3 Credits |
| 14095 | Understand and apply technological knowledge and skills in structures | Level 1 | 2 Credits |
| 14096 | Understand and apply technological knowledge and skills in Processes | Level 1 | 2 Credits |
| 14097 | Know, select and use materials, tools and equipment safely for technological purposes | Level 1 | 3 Credits |
| 14098 | Understand and use energy in technological product and systems | Level 1 | 1 Credits |
| 14776 | Apply self-management practices | Level 2 | 8 Credits |
| 14777 | Control the process within set parameters | Level 4 | 12 Credits |
| 14778 | Collect and interpret non-routine information regarding system conditions | Level 3 | 10 Credits |
| 14779 | Describe chemical process operations and related process chemistry and technology used in the chemical industry | Level 1 | 15 Credits |
| 14780 | Apply financial life skills | Level 1 | 4 Credits |
| 14781 | Collect, interpret and communicate process conditions | Level 4 | 12 Credits |
| 14782 | Apply process chemistry and related technology in the chemical industry | Level 2 | 10 Credits |
| 14783 | Conform to and apply legislation and operational instructions in chemical processing | Level 3 | 4 Credits |
| 14784 | Apply sampling theory and practice in the chemical industry | Level 2 | 5 Credits |
| 14785 | Contribute to the maintenance of a system | Level 3 | 10 Credits |
| 14788 | Contribute to maintenance of equipment | Level 2 | 18 Credits |
| 14791 | Establish system start up conditions | Level 3 | 10 Credits |
| 14793 | Respond to abnormal process conditions | Level 4 | 12 Credits |
| 14794 | Respond to hazardous and emergency conditions | Level 4 | 12 Credits |
| 14795 | Shut down the process to a specified state | Level 4 | 12 Credits |
| 14796 | Monitor and maintain system conditions | Level 3 | 10 Credits |
| 14797 | Starting the process | Level 4 | 12 Credits |
| 14798 | Respond to hazardous conditions or emergencies | Level 3 | 10 Credits |
| 14799 | Shut down the plant to a specified state | Level 3 | 10 Credits |
| 14801 | Solve operating problems using process chemistry and related technology | Level 3 | 10 Credits |
| 14802 | Start up the system | Level 3 | 10 Credits |
| 14804 | Demonstrate knowledge of Good Manufacturing Practices in a Chemical Manufacturing enviroment | Level 2 | 6 Credits |
| 14805 | Establish equipment start-up conditions to specified state | Level 2 | 18 Credits |
| 14808 | Shut down equipment | Level 2 | 18 Credits |
| 14810 | Start up equipment | Level 2 | 18 Credits |
| 15284 | Construct and install a platform | Level 2 | 1 Credits |
| 15287 | Make-up an ammonium chloride solution in a metallurgical plant | Level 2 | 4 Credits |
| 15295 | Remove an obstruction from a drawpoint using a water cannon | Level 2 | 3 Credits |
| 113899 | Demonstrate an understanding of basic programmable logic controllers | Level 3 | 6 Credits |
| 114599 | Apply Functional Value to Engineering Design | New Level Assignment Pending | 6 Credits |
| 114601 | Identify, select and co-ordinate value engineering project life cycle phase | New Level Assignment Pending | 4 Credits |
| 114602 | Maintain recorders | Level 3 | 7 Credits |
| 114603 | Maintain controllers | Level 3 | 7 Credits |
| 114605 | Carry out soldering and de-soldering procedures | Level 2 | 3 Credits |
| 114606 | Maintain level equipment | Level 3 | 7 Credits |
| 114608 | Demonstrate an understanding of and maintain equipment associated with final control elements | Level 2 | 6 Credits |
| 114609 | Demonstrate an understanding of and maintain level equipment | Level 2 | 6 Credits |
| 114610 | Maintain equipment associated with final control elements | Level 3 | 7 Credits |
| 114611 | Demonstrate an understanding of and maintain pressure equipment | Level 2 | 6 Credits |
| 114612 | Maintain pressure equipment | Level 3 | 7 Credits |
| 114614 | Demonstrate an understanding of and maintain temperature equipment | Level 2 | 6 Credits |
| 114615 | Maintain analytical equipment | Level 3 | 7 Credits |
| 114617 | Maintain temperature equipment | Level 3 | 7 Credits |
| 114619 | Maintain flow equipment | Level 3 | 7 Credits |
| 114620 | Demonstrate fault finding techniques on field instrumentation | Level 3 | 8 Credits |
| 114621 | Demonstrate an understanding of and install Instrument impulse lines | Level 2 | 6 Credits |
| 114622 | Demonstrate an understanding of and maintain flow equipment | Level 2 | 6 Credits |
| 114623 | Select, inspect, use and maintain measurement, test and calibration equipment | Level 3 | 8 Credits |
| 114624 | Read and interpret instrumentation drawings | Level 3 | 4 Credits |
| 114638 | Handle explosive materials manually | Level 1 | 5 Credits |
| 115501 | Receive and register samples in a laboratory | Level 2 | 3 Credits |
| 115505 | Handle cyanide safely in a laboratory | Level 2 | 4 Credits |
| 115547 | Replace conveyor belt steel structures (stringers, cradles) | Level 2 | 3 Credits |
| 115695 | Inspect and test a pressure vessel | Level 3 | 2 Credits |
| 116042 | Maintain process control loops | Level 4 | 10 Credits |
| 116046 | Fault find and repair Equipment associated with Final Control Elements | Level 4 | 10 Credits |
| 116050 | Fault find and repair Level Equipment | Level 4 | 10 Credits |
| 116052 | Fault find and repair Pressure Equipment | Level 4 | 10 Credits |
| 116056 | Fault find and repair Programmable Logic Controllers (PLC‘s) | Level 4 | 10 Credits |
| 116059 | Maintain Specialized Sensing Devices | Level 4 | 15 Credits |
| 116061 | Fault find and repair Analytical Equipment | Level 4 | 10 Credits |
| 116068 | Fault find and repair Temperature Equipment | Level 4 | 10 Credits |
| 116082 | Fault find and repair Flow Equipment | Level 4 | 10 Credits |
| 116084 | Demonstrate an understanding of the Principles of Process Control Loops | Level 4 | 10 Credits |
| 116086 | Demonstrate an understanding of the factors influencing the quality of measurement | Level 4 | 3 Credits |
| 116702 | Identify, handle and sample refrigeration oils for analysis, and demonstrate how oil can indicate the general condition of a refrigeration system | Level 3 | 2 Credits |
| 116778 | Develop quality plans and ensure overall quality of products or services in a small business or business unit | New Level Assignment Pending | 10 Credits |
| 116780 | Ensure compliance with legal provisions, regulations and standards | New Level Assignment Pending | 12 Credits |
| 116781 | Develop and implement sustainable processes and procedures | New Level Assignment Pending | 10 Credits |
| 116782 | Control logistical flow of components and materials | New Level Assignment Pending | 8 Credits |
| 116783 | Analyse trends and implement continuous improvements | New Level Assignment Pending | 10 Credits |
| 116784 | Design, prototype, test and refine products or services | New Level Assignment Pending | 20 Credits |
| 116786 | Manage the cash flow of a small business or a business unit | New Level Assignment Pending | 10 Credits |
| 116787 | Plan, monitor and control the financial resources for a small company or business unit | New Level Assignment Pending | 10 Credits |
| 116788 | Develop and implement a manufacturing, installation or service plan | New Level Assignment Pending | 10 Credits |
| 116789 | Identify a gap in the market and propose solutions | New Level Assignment Pending | 15 Credits |
| 116790 | Commission machines and equipment or pilot and test a new technical service | New Level Assignment Pending | 10 Credits |
| 116792 | Evaluate the financial implications of changes to sustain future growth of small or medium business or autonomous business unit | New Level Assignment Pending | 10 Credits |
| 116793 | Determine the viability of a business and monitor its performance | New Level Assignment Pending | 10 Credits |
| 117701 | Address safety, health and environmental requirements and hazards in a technical context | New Level Assignment Pending | 8 Credits |
| 119232 | Conduct magnetic particle inspection | Level 4 | 6 Credits |
| 119233 | Perform impedance measurements and calibrate devices | New Level Assignment Pending | 12 Credits |
| 119234 | Perform temperature measurements using secondary temperature standards | New Level Assignment Pending | 6 Credits |
| 119235 | Conduct dye penetrant testing | Level 3 | 4 Credits |
| 119236 | Report measurement results | New Level Assignment Pending | 3 Credits |
| 119237 | Perform and evaluate liquid penetrant testing | Level 4 | 6 Credits |
| 119238 | Define the role, functions and operation of the international measurement system | New Level Assignment Pending | 1 Credits |
| 119239 | Conduct radiographic testing | Level 4 | 8 Credits |
| 119240 | Perform AC electrical and AC/DC transfer measurements and calibrate devices | New Level Assignment Pending | 17 Credits |
| 119241 | Develop calibration and test methods and procedures | New Level Assignment Pending | 3 Credits |
| 119242 | Establish and manage a test/calibration laboratory | New Level Assignment Pending | 7 Credits |
| 119243 | Conduct ultrasonic testing | Level 4 | 8 Credits |
| 119244 | Implement a quality system to ensure technically valid measurement results in accordance with ISO/IEC 17025 | New Level Assignment Pending | 6 Credits |
| 119245 | Conduct eddy current testing | Level 4 | 8 Credits |
| 119246 | Inspect and test escalator and passenger conveyor equipment | New Level Assignment Pending | 12 Credits |
| 119247 | Conduct non-destructive radiographic tests | New Level Assignment Pending | 12 Credits |
| 119248 | Calibrate oscilloscopes | New Level Assignment Pending | 18 Credits |
| 119249 | Inspect and test lift car and counterweight equipment | New Level Assignment Pending | 5 Credits |
| 119250 | Conduct non-destructive eddy current testing | New Level Assignment Pending | 12 Credits |
| 119251 | Measure frequency using frequency counters | New Level Assignment Pending | 3 Credits |
| 119252 | Conduct non-destructive ultrasonic testing | New Level Assignment Pending | 12 Credits |
| 119253 | Conduct magnetic particle testing | Level 3 | 4 Credits |
| 119254 | Perform DC electrical and resistance measurements and calibrate devices. | New Level Assignment Pending | 17 Credits |
| 119255 | Apply the ISO document "guide to the expression of uncertainty in measurement" to estimate uncertainty of measurement | New Level Assignment Pending | 5 Credits |
| 119256 | Inspect and test electrical circuits | Level 4 | 6 Credits |
| 119257 | Produce and maintain work activity reports | Level 4 | 8 Credits |
| 119258 | Perform AC power and energy measurements and calibrate devices | New Level Assignment Pending | 12 Credits |
| 119268 | Inspect and test lift machine room equipment | New Level Assignment Pending | 15 Credits |
| 119269 | Inspect and test lift well equipment | New Level Assignment Pending | 5 Credits |
| 119270 | Inspect and test lift pit equipment | New Level Assignment Pending | 3 Credits |
| 119803 | Integrate a Process Control System | New Level Assignment Pending | 12 Credits |
| 119804 | Demonstrate an understanding of Custody Transfer | New Level Assignment Pending | 4 Credits |
| 119805 | Apply diagnostic techniques to a process control system | New Level Assignment Pending | 8 Credits |
| 119806 | Understand electromagnetic and particle radiation principles and applications | New Level Assignment Pending | 10 Credits |
| 119807 | Fault find and repair Electromagnetic and Particle Radiation Sensing Devices | New Level Assignment Pending | 10 Credits |
| 119808 | Apply engineering mathematics in the Measurement, Control and Instrumentation environment | New Level Assignment Pending | 10 Credits |
| 119809 | Design and apply modifications to existing process control systems | New Level Assignment Pending | 15 Credits |
| 119810 | Fault find and repair Specialised sensing devices | New Level Assignment Pending | 6 Credits |
| 119811 | Demonstrate an understanding of the Integrity of Measurement and Control Philosophy of a process | New Level Assignment Pending | 10 Credits |
| 119812 | Install, configure, test and analyze process communication systems | New Level Assignment Pending | 10 Credits |
| 119964 | Understand and apply a problem-solving technique | Level 2 | 2 Credits |
| 120199 | Set up and prepare 3D model space and produce a 3D model | Level 3 | 6 Credits |
| 120201 | Identify, interpret and produce working air conditioning and ventilation duct and plant drawings | Level 4 | 6 Credits |
| 120224 | Interpret and produce free hand drawings | Level 3 | 6 Credits |
| 120226 | Demonstrate an understanding of the basic principles of design | Level 3 | 2 Credits |
| 120227 | Plan and determine drawing requirements to produce a drawing | Level 3 | 6 Credits |
| 120228 | Demonstrate an understanding of the process of design | Level 3 | 3 Credits |
| 120229 | Demonstrate an understanding of drawing office procedures | Level 3 | 3 Credits |
| 120230 | Apply the code of practice for draughting | Level 3 | 4 Credits |
| 120231 | Demonstrate the basic understanding of the workflow | Level 3 | 3 Credits |
| 120440 | Repair battered rail ends | Level 2 | 18 Credits |
| 120442 | Repair rail-manufactured frogs | Level 3 | 23 Credits |
| 120446 | Operate rail grinding machine | Level 2 | 4 Credits |
| 120447 | Repair points blades | Level 4 | 9 Credits |
| 120449 | Operate hydraulic rail shearing machine | Level 2 | 4 Credits |
| 120451 | Join rails by means of the exothermic welding process | Level 3 | 40 Credits |
| 120452 | Repair rail bound frogs | Level 4 | 42 Credits |
| 120453 | Weld wheel spin burns | Level 2 | 15 Credits |
| 120454 | Operate petrol- air pre heating machine | Level 2 | 4 Credits |
| 120455 | Operate rail disc-cutting machine | Level 2 | 6 Credits |
| 230189 | Measure percentage relative humidity using secondary humidity standards | New Level Assignment Pending | 4 Credits |
| 230190 | Perform radiation thermometry measurements and calibrate Infra-red Radiation Thermometers | New Level Assignment Pending | 6 Credits |
| 230191 | Perform surface temperature measurements and calibrate devices | New Level Assignment Pending | 6 Credits |
| 230192 | Calibrate isothermal media by temperature simulation and temperature mapping at temperatures not exceeding 250ºc | New Level Assignment Pending | 10 Credits |
| 230193 | Generate reference temperatures and scales | New Level Assignment Pending | 12 Credits |
| 230194 | Perform resistance thermometry measurements and calibrate Resistance Temperature Devices (RTDs) | New Level Assignment Pending | 6 Credits |
| 230195 | Calibrate installations by temperature simulation and measurement in furnaces at temperatures exceeding 250ºC | New Level Assignment Pending | 7 Credits |
| 230196 | Perform Liquid in Glass Thermometry measurements and calibrate Liquid in Glass Thermometers (LIGs) | New Level Assignment Pending | 6 Credits |
| 230197 | Perform thermocouple thermometry measurements and calibrate thermocouple devices | New Level Assignment Pending | 6 Credits |
| 242750 | Reschedule surplus power generation capacity on national and international electrical transmission systems | New Level Assignment Pending | 15 Credits |
| 242752 | Demonstrate knowledge and understanding of the integrated Electrical System control work environment | Level 4 | 4 Credits |
| 242753 | Know and understand the operation of Electrical Power Transmission functions | New Level Assignment Pending | 4 Credits |
| 242754 | Demonstrate knowledge and understanding of system frequency and tie-line control | New Level Assignment Pending | 4 Credits |
| 242755 | Demonstrate knowledge and understanding of power plant auxilliary systems | Level 4 | 9 Credits |
| 242757 | Know and understand power dispatch on an electrical interconnected system | New Level Assignment Pending | 4 Credits |
| 242758 | Describe the operating philosophy of steam generator plant systems | Level 4 | 9 Credits |
| 242759 | Describe power dispatch under deregulation on the electrical interconnected power system | New Level Assignment Pending | 4 Credits |
| 242760 | Perform remote operations from an electronic management system on hydro and gas driven power generating plant | New Level Assignment Pending | 9 Credits |
| 242761 | Know and understand system security on the electrical network interconnected system | New Level Assignment Pending | 4 Credits |
| 242762 | Demonstrate knowledge and understanding of communication on electrical interconnected power system | New Level Assignment Pending | 4 Credits |
| 242763 | Reschedule active power generation shortages on national and international electrical transmission systems | New Level Assignment Pending | 15 Credits |
| 242764 | Demonstrate knowledge of power system fundamentals | New Level Assignment Pending | 4 Credits |
| 242765 | Know and understand system operations under abnormal conditions on interconnected electrical networks | New Level Assignment Pending | 4 Credits |
| 242766 | Demonstrate knowledge and understanding of operating regulations for high voltage systems | New Level Assignment Pending | 8 Credits |
| 242767 | Commission power plant generating units onto the electrical integrated network | New Level Assignment Pending | 11 Credits |
| 242768 | Demonstrate knowledge of power system voltage control | New Level Assignment Pending | 4 Credits |
| 242769 | Describe the operating philosophy of steam driven turbo-generator plant systems | Level 4 | 9 Credits |
| 242770 | Demonstrate knowledge and understanding of electrical network layout and configuration | New Level Assignment Pending | 18 Credits |
| 242771 | Know and understand system restoration on the interconnected electrical networks | New Level Assignment Pending | 4 Credits |
| 242772 | Demonstrate knowledge and understanding of Southern African power contracts and agreements related to electrical network load dispatch | New Level Assignment Pending | 17 Credits |
| 242773 | Describe the implication of electrical system control changes on the electrical interconnected power system | New Level Assignment Pending | 4 Credits |
| 242774 | Operate Electronic Information Systems used in the control of an integrated Electrical Network | New Level Assignment Pending | 15 Credits |
| 242775 | Perform load following on electrical transmission systems | New Level Assignment Pending | 15 Credits |
| 242776 | Maintain the quality of power supply in terms of frequency on electrical transmission systems | New Level Assignment Pending | 18 Credits |
| 242921 | Monitor and maintain glass forming product quality and plant efficiency | Level 3 | 10 Credits |
| 242922 | Assess the impact of feedstock variables on the glass forming process | Level 3 | 10 Credits |
| 242923 | Start-up and shutdown an integrated glass forming process | Level 3 | 10 Credits |
| 242924 | Solve and address glass forming problems | Level 3 | 15 Credits |
| 242941 | Operate the feeder mechanism in the production of formed glass containers | Level 3 | 18 Credits |
| 242942 | Control an integrated container glass forming process | Level 3 | 25 Credits |
| 243012 | Tint and match pigmented surface coatings | Level 3 | 10 Credits |
| 243049 | Weld carbon steel pipe using the cored-wire welding process in all positions | Level 4 | 10 Credits |
| 243050 | Weld pipe within the stainless steel material group, using the gas tungsten arc welding process in all positions | Level 4 | 20 Credits |
| 243051 | Weld steel workpieces, using the plasma arc welding process in all positions | Level 4 | 20 Credits |
| 243052 | Weld carbon steel workpieces using the cored-wire welding process in all positions | Level 3 | 8 Credits |
| 243053 | Weld carbon steel workpieces using the oxy-acetylene gas welding process in all positions | Level 3 | 10 Credits |
| 243054 | Weld carbon steel pipe, using the gas tungsten arc welding process in all positions | Level 4 | 20 Credits |
| 243056 | Weld carbon steel workpieces using the shielded metal arc welding process in all positions | Level 2 | 16 Credits |
| 243057 | Weld workpieces within the stainless steel material group, using the gas tungsten arc welding process in all positions | Level 4 | 10 Credits |
| 243058 | Weld carbon steel workpieces using the gas tungsten arc welding process in all positions | Level 3 | 25 Credits |
| 243060 | Weld pipe within the stainless steel material group, using the gas metal arc welding process in all positions | Level 4 | 20 Credits |
| 243062 | Weld carbon steel pipe, using the shielded metal arc welding process in all positions | Level 4 | 20 Credits |
| 243063 | Weld carbon steel work-pieces using the shielded metal arc welding process in the down-hand position. | Level 2 | 15 Credits |
| 243064 | Weld carbon steel workpieces, using the gas metal arc welding process in all positions | Level 2 | 15 Credits |
| 243065 | Weld carbon steel pipe using the gas metal arc welding process in all positions | Level 4 | 20 Credits |
| 243066 | Weld carbon steel workpieces using the gas metal arc welding process in the down-hand position | Level 2 | 8 Credits |
| 243067 | Cut materials using the oxy-fuel gas cutting process (manual cutting) | Level 2 | 6 Credits |
| 243068 | Weld carbon steel workpieces using the gas tungsten arc welding process in the downhand position | Level 3 | 15 Credits |
| 243069 | Braze metals using the oxy-fuel brazing process | Level 2 | 6 Credits |
| 243070 | Programme, use and maintain an industrial robot system | Level 4 | 10 Credits |
| 243072 | Weld workpieces using the oxy-acetylene gas welding process in the downhand position | Level 2 | 10 Credits |
| 243074 | Weld carbon steel components, using the submerged arc welding process in a downhand position | Level 2 | 12 Credits |
| 243076 | Weld carbon steel workpieces using the cored-wire welding process in the downhand position | Level 2 | 8 Credits |
| 243077 | Cut material using the oxy-fuel pipe cutting device | Level 3 | 3 Credits |
| 243078 | Perform destructive testing on welded specimens | Level 3 | 5 Credits |
| 243079 | Weld workpieces within the aluminium material group, using the gas tungsten arc welding process in all positions. | Level 4 | 10 Credits |
| 243080 | Cut material using the oxy-fuel profile cutting machine | Level 3 | 5 Credits |
| 243081 | Cut material using the oxy-fuel straight-line cutting machine | Level 3 | 3 Credits |
| 243083 | Weld pipe within the aluminium material group, using the gas metal arc welding process in all positions | Level 4 | 20 Credits |
| 243085 | Weld carbon steel workpieces, using the shielded metal arc and gas tungsten arc combination welding processes, in all positions | Level 4 | 8 Credits |
| 243086 | Draw and interpret complex plate, pipe and structural steel plate, pipe and structural steel drawings | Level 3 | 6 Credits |
| 243087 | Weld pipe within the aluminium material group, using the gas tungsten arc welding process in all positions | Level 4 | 20 Credits |
| 243088 | Weld carbon steel pipe, with combination welding processes using the gas tungsten arc welding and gas metal arc welding, in all positions | Level 4 | 8 Credits |
| 243089 | Weld workpieces within the aluminium material group, using the gas metal arc welding process in all positions | Level 4 | 10 Credits |
| 243775 | Install or replace lift roping systems | Level 3 | 7 Credits |
| 244061 | Interpret material safety data sheets (MSDS) in order to address chemical safety in the workplace | Level 1 | 4 Credits |
| 244062 | Demonstrate understanding of elementary chemical principles and their applications in process industries | Level 1 | 8 Credits |
| 244063 | Maintain basic safety, health and environmental issues | Level 1 | 6 Credits |
| 244064 | Understand elementary process instrumentation | Level 1 | 5 Credits |
| 244065 | Demonstrate understanding of process piping, fittings and valves | Level 1 | 4 Credits |
| 244066 | Understand the principles of physics related to heat and thermal energy and its application in a processing environment | Level 1 | 4 Credits |
| 244067 | Read and interpret simple drawings in a process environment | Level 1 | 3 Credits |
| 244068 | Demonstrate understanding of the organisation and its relationships with stakeholders and the industry within which it operates | Level 2 | 3 Credits |
| 244069 | Demonstrate understanding of solid, liquid and gas storage methods | Level 1 | 6 Credits |
| 244070 | Demonstrate understanding of solid, liquid and gas transfer equipment | Level 1 | 12 Credits |
| 244071 | Apply sampling theory and practice | Level 2 | 5 Credits |
| 244072 | Demonstrate understanding of heat transfer equipment | Level 2 | 10 Credits |
| 244073 | Receive, handle and store hazardous chemicals safely | Level 2 | 5 Credits |
| 244074 | Demonstrate understanding of liquid-solid and solid-solid separation processes | Level 2 | 10 Credits |
| 244075 | Maintain the quality of products in a production environment | Level 2 | 5 Credits |
| 244076 | Apply elementary statistical process control principles | Level 2 | 6 Credits |
| 244077 | Demonstrate understanding of chemicals in a processing environment | Level 2 | 6 Credits |
| 244078 | Demonstrate understanding of a work permit system | Level 2 | 3 Credits |
| 244079 | Respond to emergencies in a process environment | Level 2 | 3 Credits |
| 244080 | Apply standard operating procedures in a process environment | Level 2 | 10 Credits |
| 244081 | Understand the properties and applications of materials in a processing environment. | Level 2 | 5 Credits |
| 244082 | Monitor plant and equipment in a process environment | Level 2 | 10 Credits |
| 244083 | Solve operating problems using relevant technologies | Level 2 | 5 Credits |
| 244090 | Demonstrate understanding of the principles of kinematics in physics | Level 3 | 6 Credits |
| 244091 | Identify and interpret instrument control loops | Level 3 | 8 Credits |
| 244097 | Demonstrate an understanding of the principles of work, energy and power in physics | Level 4 | 6 Credits |
| 244098 | Perform statistical process control in a process environment | Level 3 | 4 Credits |
| 244103 | Use automated control techniques to control a process | Level 4 | 8 Credits |
| 244241 | Apply knowledge of chemical reactions in a processing environment | Level 3 | 6 Credits |
| 244341 | Perform heat manipulation processes on plate, pipe and structural materials | Level 3 | 4 Credits |
| 244345 | Identify fabrication materials, their characteristics and applications used in engineering | Level 2 | 4 Credits |
| 244506 | Implement Conformity Assessment Body management systems | New Level Assignment Pending | 10 Credits |
| 244512 | Improve Conformity Assessment Body management systems | New Level Assignment Pending | 13 Credits |
| 244534 | Establish Conformity Assessment Body management systems | New Level Assignment Pending | 9 Credits |
| 244664 | Dismantle basic components and sub-assemblies | Level 2 | 3 Credits |
| 244702 | Test Hydraulic Cylinders | Level 4 | 4 Credits |
| 244703 | Specify hydraulic filtration and fluid requirements | Level 4 | 3 Credits |
| 244707 | Maintain fluid power components | Level 4 | 6 Credits |
| 246447 | Conduct safety, health and environmental inspections of a gas installation | Level 3 | 4 Credits |
| 246452 | Design an advanced gas installation | Level 3 | 12 Credits |
| 246453 | Demonstrate understanding of equipment used in gas installations | Level 3 | 8 Credits |
| 246454 | Design a LPG or natural gas installation. | Level 3 | 15 Credits |
| 246455 | Demonstrate understanding of LPG and natural gas systems and equipment | Level 3 | 8 Credits |
| 246457 | Identify and interpret instrument control loops in gas installations | Level 3 | 5 Credits |
| 246458 | Demonstrate understanding of the gas industry, the organisation and its different stakeholders | Level 3 | 3 Credits |
| 246465 | Implement safety, health and environmental requirements in a gas installation | Level 3 | 6 Credits |
| 246467 | Install basic domestic or commercial gas equipment | Level 3 | 15 Credits |
| 246470 | Perform maintenance related functions on a gas installation | Level 3 | 4 Credits |
| 246474 | Demonstrate understanding of process plant technology | Level 2 | 10 Credits |
| 246476 | Produce formulated industrial and consumer products | Level 2 | 10 Credits |
| 246478 | Maintain the integrity of a sensitive manufacturing environment | Level 2 | 6 Credits |
| 246482 | Control the activities of a small chemical manufacturing business | Level 2 | 6 Credits |
| 246485 | Demonstrate understanding of basic automotive gas system equipment and systems | Level 3 | 4 Credits |
| 246488 | Demonstrate understanding of medical gas equipment and systems | Level 3 | 6 Credits |
| 246490 | Demonstrate understanding of speciality gas installations and equipment | Level 3 | 4 Credits |
| 246491 | Demonstrate understanding of gas pipeline and pipe network systems | Level 3 | 4 Credits |
| 246492 | Demonstrate understanding of advanced automotive gas system equipment and systems | Level 3 | 4 Credits |
| 246566 | Understand basic gas instrumentation | Level 2 | 5 Credits |
| 246567 | Perform corrective maintenance on gas equipment and appliances | Level 2 | 4 Credits |
| 246568 | Understand the regulatory environment applicable to gas installations | Level 2 | 3 Credits |
| 246569 | Apply quality principles on a gas installation project | Level 2 | 3 Credits |
| 246570 | Perform routine maintenance on gas equipment and appliances | Level 2 | 6 Credits |
| 246571 | Demonstrate understanding of gas piping, fittings and valves | Level 2 | 4 Credits |
| 246572 | Solve equipment and installation problems during gas installations using relevant technologies | Level 2 | 5 Credits |
| 246575 | Apply safety concepts to a gas installation site | Level 2 | 3 Credits |
| 246576 | Procure and maintain stock levels of equipment and consumables required for gas system installations and maintenance | Level 2 | 3 Credits |
| 246577 | Demonstrate understanding of gas properties | Level 2 | 4 Credits |
| 246578 | Apply productivity principles on a gas installation project | Level 2 | 4 Credits |
| 246663 | Perform surveillance on Information and Communications technology networks | New Level Assignment Pending | 10 Credits |
| 246682 | Install small network elements | Level 4 | 8 Credits |
| 252235 | Analyse and interpret mineralogical composition of cement and clinker | New Level Assignment Pending | 10 Credits |
| 252236 | Perform standard cement/lime industry wet chemical analysis | Level 3 | 12 Credits |
| 253376 | Overhaul centrifugal pumps | Level 4 | 7 Credits |
| 253494 | Maintain compressors | Level 3 | 15 Credits |
| 253554 | Identify and use steel wire ropes | Level 3 | 12 Credits |
| 253555 | Manufacture basic rigging hand tools | Level 2 | 4 Credits |
| 253556 | Read and interpret working piping drawings | Level 3 | 4 Credits |
| 253575 | Inspect, use and care for manual lifting equipment and tackle | Level 2 | 5 Credits |
| 253578 | Inspect, prepare and use a man-lift carriage for work at elevated heights | Level 4 | 3 Credits |
| 253582 | Lift and move a load using manual lifting equipment and tackle | Level 2 | 8 Credits |
| 253583 | Inspect, prepare and use a tube bundle machine on a petrochemical plant | Level 4 | 4 Credits |
| 253586 | Perform a boom conversion | Level 4 | 5 Credits |
| 253590 | Lift and move a load in suspension using a mobile crane | Level 3 | 4 Credits |
| 253591 | Identify and use fibre ropes | Level 2 | 4 Credits |
| 253595 | Direct the operation of an overhead crane | Level 2 | 3 Credits |
| 253596 | Perform a pre-engineering study in order to undertake rigging activities | Level 4 | 6 Credits |
| 253600 | Use a side-boom to lift, lower and carry materials | Level 2 | 5 Credits |
| 253601 | Secure a load for transportation | Level 2 | 4 Credits |
| 253615 | Lift and move a load using the pick and carry method | Level 2 | 4 Credits |
| 253638 | Sling and communicate during crane operations | Level 2 | 4 Credits |
| 253640 | Perform a lifting task using a floating method | Level 3 | 8 Credits |
| 253654 | Perform pre-use maintenance and inspection on lifting machinery and equipment | Level 3 | 4 Credits |
| 253656 | Communicate with clients | Level 3 | 3 Credits |
| 253658 | Perform a lifting task by using a mobile crane | Level 3 | 8 Credits |
| 253660 | Supervise advanced mobile crane operations | Level 4 | 20 Credits |
| 253735 | Plan and schedule workflow | Level 4 | 3 Credits |
| 253736 | Use welding definitions and symbols | Level 2 | 5 Credits |
| 253880 | Adapt to working in a client‘s work environment | Level 3 | 3 Credits |
| 253883 | Lift and move a complex load using a winch | Level 4 | 6 Credits |
| 254317 | Install fire alarm and detection systems | Level 4 | 6 Credits |
| 254318 | Sustain performance of energy systems | New Level Assignment Pending | 20 Credits |
| 254334 | Develop an energy management strategy | New Level Assignment Pending | 12 Credits |
| 254336 | Implement technology for sustainable energy | New Level Assignment Pending | 20 Credits |
| 254339 | Design sustainable solutions for energy resources | New Level Assignment Pending | 20 Credits |
| 254354 | Quantify the benefit of proposed energy changes on integrated facilities | New Level Assignment Pending | 18 Credits |
| 254374 | Quantify the benefit of proposed energy interventions on energy equipment | New Level Assignment Pending | 18 Credits |
| 254395 | Maintain water sprinkler systems | New Level Assignment Pending | 3 Credits |
| 254398 | Maintain fire alarm and detection systems | New Level Assignment Pending | 3 Credits |
| 255735 | Commission passive fire protection systems | New Level Assignment Pending | 6 Credits |
| 255874 | Demonstrate knowledge and understanding of Pulverised Fuel Firing Regulations (PFFR) as applied on fossil fired power generating plants | New Level Assignment Pending | 3 Credits |
| 256235 | Monitor and control the production of laminated paper or board | Level 2 | 8 Credits |
| 256236 | Demonstrate understanding of pulp and paper manufacturing processes | Level 2 | 10 Credits |
| 256237 | Monitor and control the handling and storage of bark | Level 2 | 3 Credits |
| 256238 | Monitor and control the manufacture of cores for the pulp and paper industry | Level 2 | 3 Credits |
| 256280 | Monitor and control the production of chemical pulp | Level 4 | 15 Credits |
| 256281 | Monitor and control the recovery of pulping liquor chemicals | Level 4 | 15 Credits |
| 256282 | Monitor and control the forming and pressing of paper, board or tissue | Level 4 | 15 Credits |
| 256283 | Monitor and control the de-inking of recycled fibres for use in pulp and paper manufacturing | Level 4 | 15 Credits |
| 256284 | Perform physical and chemical tests on pulp | Level 3 | 4 Credits |
| 256285 | Monitor and control the preparation and supply of bagasse | Level 2 | 4 Credits |
| 256286 | Monitor and control the wrapping of finished paper, board or tissue products | Level 2 | 4 Credits |
| 256287 | Monitor and control the receipt and storage of logs in a woodyard | Level 2 | 4 Credits |
| 256288 | Monitor and control the production of embossed paper, board or tissue | Level 2 | 4 Credits |
| 256289 | Monitor and control the production of cut cores for the pulp and paper industry | Level 2 | 3 Credits |
| 256290 | Monitor and control the debarking of logs using a drum debarker | Level 3 | 6 Credits |
| 256291 | Monitor and control the production of white liquor in a causticizing process | Level 3 | 10 Credits |
| 256292 | Monitor and control the production of paper, board or tissue reels on a winder or rewinder | Level 3 | 10 Credits |
| 256293 | Monitor and control the production of papermaking stock | Level 3 | 12 Credits |
| 256294 | Conduct physical tests on paper, board or tissue | Level 3 | 5 Credits |
| 256296 | Perform visual inspection checks to identify paper defects | Level 3 | 4 Credits |
| 256297 | Perform physical and chemical tests on raw materials | Level 3 | 4 Credits |
| 256298 | Monitor and control the generation of chlorine dioxide for pulp bleaching | Level 3 | 15 Credits |
| 256299 | Monitor and control the cutting and slitting of paper, board, pulp or tissue material | Level 3 | 6 Credits |
| 256300 | Monitor and control the unslaked lime process using a rotary lime kiln | Level 3 | 10 Credits |
| 256301 | Monitor and control the production of calcium bisulphite cooking liquor for the production of pulp | Level 3 | 10 Credits |
| 256302 | Monitor and control the preparation and supply of washed and depithed bagasse | Level 3 | 6 Credits |
| 256303 | Monitor and control the evaporation process used to increase pulping spent liquor solids | Level 3 | 12 Credits |
| 256305 | Understand the fundamental principles of screening and cleaning operations | Level 3 | 6 Credits |
| 256306 | Monitor and control the bleaching of pulp used in paper, board or tissue products | Level 3 | 15 Credits |
| 256307 | Monitor and control the production of crude tall oil | Level 3 | 6 Credits |
| 256308 | Monitor and control the oxygen delignification process | Level 3 | 10 Credits |
| 256309 | Monitor and control the production of coating slurry | Level 3 | 10 Credits |
| 256310 | Monitor and control the process to dry and reel paper, board or tissue | Level 3 | 15 Credits |
| 256311 | Monitor and control the coating of paper or board using a coating machine | Level 3 | 10 Credits |
| 256312 | Monitor and control the production of mechanical pulp | Level 3 | 12 Credits |
| 256314 | Monitor and control the production of supercalendered paper or board | Level 3 | 6 Credits |
| 256334 | Monitor and control the preparation of chemical additives | Level 3 | 4 Credits |
| 256354 | Demonstrate understanding of the water and effluent treatment processes in the pulp and paper industry | Level 3 | 6 Credits |
| 256355 | Perform physical and chemical tests on pulp and paper chemicals | Level 3 | 4 Credits |
| 256356 | Monitor and control the production and storage of wood chips | Level 3 | 6 Credits |
| 256375 | Monitor and control the removal of spent liquor contaminants from pulp | Level 3 | 8 Credits |
| 256455 | Commission mechanical fire extinguishing systems | New Level Assignment Pending | 6 Credits |
| 256601 | Determine the precious metal content of an assayed sample by high temperature cupellation and weighing | Level 3 | 7 Credits |
| 257235 | Demonstrate knowledge and understanding of the RSA Regulated Industry (Downstream) Marketing and Operations trends | New Level Assignment Pending | 8 Credits |
| 257236 | Apply knowledge of energy legislation and regulatory requirements | New Level Assignment Pending | 6 Credits |
| 257237 | Demonstrate knowledge and understanding of energy industry standard codes | New Level Assignment Pending | 5 Credits |
| 257238 | Demonstrate an understanding of Third Party Access | New Level Assignment Pending | 6 Credits |
| 257239 | Demonstrate an understanding of South African Regulated Industries | New Level Assignment Pending | 8 Credits |
| 257240 | Demonstrate knowledge and understanding of Industry Infrastructure Planning and Tariff Setting | New Level Assignment Pending | 8 Credits |
| 257241 | Demonstrate an understanding of the principles of regulation | New Level Assignment Pending | 5 Credits |
| 258075 | Demonstrate understanding of the scientific principles applicable to glass melting | Level 3 | 4 Credits |
| 258076 | Monitor and control the production of molten glass | Level 3 | 12 Credits |
| 258077 | Demonstrate understanding of electrostatic precipitator technology | Level 3 | 6 Credits |
| 258078 | Perform visual inspection checks to identify glass defects | Level 3 | 4 Credits |
| 260757 | Operate a straddle carrier | Level 3 | 10 Credits |
| 260758 | Operate a wall-mounted jib | Level 3 | 7 Credits |
| 260759 | Operate a wharf side crane (rail mounted) | Level 3 | 8 Credits |
| 260760 | Operate a inland container crane (rail mounted) | Level 3 | 10 Credits |
| 260761 | Operate a reach stacker | Level 3 | 10 Credits |
| 260762 | Operate rough terrain/earthmoving/agricultural equipment | Level 3 | 11 Credits |
| 260763 | Operate a floating crane | Level 3 | 12 Credits |
| 260764 | Operate a ships crane | Level 3 | 8 Credits |
| 260765 | Operate a rubber tyred gantry crane | Level 3 | 12 Credits |
| 260777 | Operate a container side loader | Level 3 | 8 Credits |
| 260778 | Demonstrate knowledge of the regulatory framework for lifting machines | Level 3 | 8 Credits |
| 260779 | Describe different categories of lifting machines | Level 3 | 8 Credits |
| 260780 | Operate a sugar cane crane | Level 3 | 8 Credits |
| 260781 | Operate a telescopic boom handler | Level 3 | 10 Credits |
| 260797 | Operate a sideloader lift truck | Level 3 | 8 Credits |
| 260798 | Operate a cantilever container crane (ship to shore) | Level 3 | 12 Credits |
| 260817 | Operate a scotch derrick crane (ship mounted) | Level 3 | 10 Credits |
| 260818 | Operate a counter balanced lift truck in excess of 15 tons | Level 3 | 9 Credits |
| 260837 | Move and store a hazardous load | Level 3 | 8 Credits |
| 260838 | Operate a wharf side jib crane | Level 3 | 8 Credits |
| 261439 | Demonstrate knowledge of locomotive layout | Level 2 | 2 Credits |
| 261442 | Remove and replace faulty vacuum and/or air brake system components | Level 2 | 4 Credits |
| 262159 | Inspect and evaluate the conformance of air-conditioning and refrigeration pressure equipment | New Level Assignment Pending | 15 Credits |
| 262481 | Demonstrate an understanding of detection equipment | Level 3 | 4 Credits |
| 262482 | Maintain programmable field instruments | Level 3 | 12 Credits |
| 262483 | Fault find and repair process control loops | Level 4 | 15 Credits |
| 262484 | Perform routine maintenance on analysers | Level 4 | 12 Credits |
| 262485 | Demonstrate an understanding of analytical measurement systems | Level 3 | 12 Credits |
| 262487 | Fault find and repair analytical equipment | Level 4 | 15 Credits |
| 262488 | Perform routine maintenance on integrated process control loops | Level 4 | 15 Credits |
| 262489 | Demonstrate an understanding of instrumentation calibration, terminology and standards | Level 2 | 6 Credits |
| 262924 | Use and care for medium voltage electrical test instruments | Level 3 | 4 Credits |
| 262926 | Inspect, remove and install wheel sets on rolling stock | Level 3 | 2 Credits |
| 263017 | Monitor performance of equipment and machinery on locomotives during operation | Level 4 | 8 Credits |
| 263025 | Test a train equipped with a vacuum and/or air brake system | New Level Assignment Pending | 12 Credits |
| 263454 | Monitor and control the base metal leaching process | Level 3 | 15 Credits |
| 263475 | Operate packaging equipment used in an explosives manufacturing environment | Level 3 | 8 Credits |
| 263495 | Monitor and control the production of chemicals in a chemical process plant | Level 3 | 15 Credits |
| 263497 | Monitor and control the manufacturing of ammonium nitrate based explosives | Level 3 | 15 Credits |
| 263515 | Monitor and control the manufacturing of initiating devices | Level 3 | 15 Credits |
| 263574 | Monitor and control the manufacturing of propellants | Level 3 | 15 Credits |
| 263575 | Monitor and control the manufacturing of small arms ammunition | Level 3 | 15 Credits |
| 263576 | Monitor and control the cobalt production process | Level 3 | 15 Credits |
| 263577 | Monitor and control a crystallisation process | Level 3 | 15 Credits |
| 263594 | Monitor and control the nickel production process | Level 3 | 15 Credits |
| 263595 | Monitor and control the platinum group metals preparation process | Level 3 | 15 Credits |
| 263614 | Monitor and control the Platinum Group Metals (PGMs) recovery process | Level 3 | 15 Credits |
| 263615 | Monitor and control the platinum group metals separation process | Level 3 | 15 Credits |
| 263616 | Monitor and control the sulphuric acid production process | Level 3 | 15 Credits |
| 263617 | Monitor and control pyrite processing within a sulphuric acid production plant | Level 3 | 15 Credits |
| 263618 | Monitor and control the Platinum Group Metals purification process | Level 3 | 15 Credits |
| 263619 | Monitor and control the manufacturing of explosives accessories | Level 3 | 15 Credits |
| 263634 | Monitor and control the conversion of platinum group metal salts into final metal products | Level 3 | 15 Credits |
| 263635 | Monitor and control the pyrite roasting process | Level 3 | 15 Credits |
| 263636 | Monitor and control an electrowinning process | Level 3 | 15 Credits |
| 263854 | Monitor and control the platinum group metals supporting processes | Level 3 | 15 Credits |
| 263896 | Conduct an energy audit | New Level Assignment Pending | 10 Credits |
| 263897 | Evaluate and apply heat recovery systems | New Level Assignment Pending | 7 Credits |
| 263898 | Develop a plan to enable energy savings | New Level Assignment Pending | 15 Credits |
| 263900 | Demonstrate understanding of energy metering and tariffs | New Level Assignment Pending | 13 Credits |
| 263902 | Develop an energy management policy within an organisational structure | New Level Assignment Pending | 7 Credits |
| 263905 | Analyse energy consumption data | New Level Assignment Pending | 15 Credits |
| 263906 | Demonstrate understanding of the basic principles of energy | New Level Assignment Pending | 7 Credits |
| 263909 | Develop the business case for energy management opportunities | New Level Assignment Pending | 4 Credits |
| 263910 | Evaluate industrial insulation systems and make recommendations to improve efficiency | New Level Assignment Pending | 5 Credits |
| 263914 | Evaluate refrigeration and heat pump performance efficiency | New Level Assignment Pending | 7 Credits |
| 263915 | Evaluate steam generation and distribution systems for efficiency | New Level Assignment Pending | 7 Credits |
| 263916 | Apply electrical fundamentals to iplement energy saving initiatives | New Level Assignment Pending | 7 Credits |
| 263917 | Implement energy efficiency in building systems | New Level Assignment Pending | 20 Credits |
| 263934 | Apply energy management methodologies to fans and pumps | New Level Assignment Pending | 7 Credits |
| 263935 | Evaluate compressed air performance efficiency | New Level Assignment Pending | 7 Credits |
| 263954 | Evaluate fuel fired equipment performance efficiency | New Level Assignment Pending | 7 Credits |
| 337161 | Interpret a business case and write an audit report | New Level Assignment Pending | 15 Credits |
| 337163 | Verify savings achieved through an energy audit and implementation | New Level Assignment Pending | 15 Credits |
| 365143 | Demonstrate an understanding of inflatable boat technology | Level 2 | 5 Credits |
| 365145 | Demonstrate an understanding of corrosion and basic metalwork in a marine environment | Level 2 | 10 Credits |
| 376540 | Demonstrate an understanding of boat design | Level 4 | 15 Credits |
| 376542 | Install and maintain a range of marine systems | Level 3 | 25 Credits |
| 376544 | Manufacture and install marine joinery components | Level 3 | 30 Credits |
| 376545 | Apply marine fairing and painting techniques | Level 4 | 15 Credits |
| 376581 | Install marine electrical systems | Level 4 | 20 Credits |
| 376925 | Explain and use organisational procedures | Level 3 | 6 Credits |
| 376940 | Manufacture a range of conveyor belt products | Level 3 | 25 Credits |
| 376943 | Develop learning strategies and techniques | Level 3 | 3 Credits |
