| ID | Name | NQF Level | Credits |
|---|
| 13514 | Demonstrate understanding of basics of lumber milling operation | Level 1 | 10 Credits |
| 13515 | Demonstrate understanding of details of equipment, processes and procedures in finger-jointing and laminating area in lumber mill | Level 1 | 15 Credits |
| 13518 | Perform necessary manual handling in dry mill conversion area in lumber mill | Level 1 | 10 Credits |
| 13522 | Perform basic maintenance and lubrication in relevant workplace in lumber mill | Level 2 | 10 Credits |
| 13528 | Demonstrate understanding of different parts of tree and its stem on cross section | Level 2 | 5 Credits |
| 13535 | Follow procedures to assist with setting up and operating green timber processing facilities in wet mill of lumber mill | Level 2 | 15 Credits |
| 13554 | Control basic maintenance and lubrication programme in Lumber Mill | Level 3 | 15 Credits |
| 13555 | Demonstrate understanding of structure of wood and how it relates to its appearance, strength and how it holds water | Level 3 | 15 Credits |
| 13569 | Set up and operate primary log breakdown facilities in green timber processing area of lumber mill | Level 3 | 10 Credits |
| 13574 | Set up and operate secondary log breakdown facilities in green timber processing area of lumber mill | Level 3 | 10 Credits |
| 13576 | Manage production in relevant workplace in lumber mill | Level 4 | 15 Credits |
| 13578 | Manage workforce in relevant workplace in lumber mill | Level 4 | 15 Credits |
| 13579 | Manage safety, health and environmental protection in relevant workplace in lumber mill | Level 4 | 15 Credits |
| 13580 | Demonstrate understanding of influence of wood structure and properties, and certain production factors on wood quality | Level 4 | 15 Credits |
| 110467 | Demonstrate understanding of specific details of lumber grading process in the lumber mill | Level 2 | 20 Credits |
| 117033 | Demonstrate knowledge of wire rope, rigging accessories, anchor systems and rigging in cable yarding operations | Level 3 | 3 Credits |
| 117042 | Demonstrate knowledge of choking and dechoking timber | Level 1 | 1 Credits |
| 117043 | Choke and dechoke timber during extraction with a skidding machine fitted with a winch in a production situation | Level 2 | 3 Credits |
| 117044 | Demonstrate knowledge of ground-based machine extraction | Level 2 | 1 Credits |
| 117045 | Extract timber to a landing using a forwarder in a production situation | Level 4 | 35 Credits |
| 117046 | Prepare, operate and maintain a vehicle mounted knuckle boom loader in a non-production situation | Level 3 | 5 Credits |
| 117047 | Load, off-load and stack timber using a loader in a production situation | Level 3 | 20 Credits |
| 117048 | Prepare, operate and maintain a mechanised harvesting machine in a non-production situation | Level 3 | 5 Credits |
| 117049 | Demonstrate knowledge of basic safety in forestry operations | Level 2 | 1 Credits |
| 117050 | Demonstrate knowledge of mechanical timber handling equipment | Level 2 | 1 Credits |
| 117051 | Cross-cut tree lengths using a slasher in a production situation | Level 3 | 15 Credits |
| 117052 | Prepare, operate and maintain a 3-wheeled loader in a non-production situation | Level 3 | 5 Credits |
| 117053 | Fell, debranch and debark trees using a harvester in a production situation | Level 4 | 20 Credits |
| 117054 | Fell and process trees into products using a harvester in a non-production situation | Level 3 | 26 Credits |
| 117055 | Prepare, operate and maintain a self-propelled knuckle boom loader in a non-production situation | Level 3 | 5 Credits |
| 117056 | Fell and process trees into products using a harvester in a production situation | Level 4 | 26 Credits |
| 117057 | Delimb tree lengths using a static delimber in a production situation | Level 3 | 15 Credits |
| 117058 | Maintain a chainsaw and cut felled timber using a chainsaw | Level 2 | 4 Credits |
| 117059 | Scale tree lengths into saw and veneer logs in a production situation | Level 3 | 10 Credits |
| 117060 | Fell and bunch trees using a slew boom feller-buncher in a non-production situation | Level 3 | 15 Credits |
| 117061 | Debranch felled trees using a chainsaw in a production situation | Level 2 | 3 Credits |
| 117062 | Fell trees with a chainsaw using the standard technique and felling levers | Level 2 | 2 Credits |
| 117063 | Fell and bunch trees using a drive-to-tree feller-buncher in a non-production situation | Level 3 | 15 Credits |
| 117064 | Fell trees using a chainsaw in a production situation | Level 3 | 5 Credits |
| 117065 | Fell and bunch trees using a feller buncher in a production situation | Level 4 | 15 Credits |
| 117066 | Fell trees with a chainsaw using specialised techniques | Level 3 | 2 Credits |
| 117067 | Fell, debranch and debark trees using a harvester in a non-production situation | Level 3 | 20 Credits |
| 117068 | Scale tree lengths into poles in a production situation | Level 3 | 3 Credits |
| 117069 | Cross-cut felled trees using a chainsaw in a production situation | Level 2 | 2 Credits |
| 117070 | Prepare an operational harvest plan | Level 4 | 4 Credits |
| 117071 | Fell trees using a chainsaw and machine assistance | Level 3 | 2 Credits |
| 117072 | Extract timber to a landing using a cable skidder in a production situation | Level 3 | 20 Credits |
| 117073 | Scale tree lengths into standard log lengths in a production situation | Level 1 | 1 Credits |
| 117074 | Extract timber to a landing using a grapple skidder in a production situation | Level 3 | 25 Credits |
| 117075 | Operate a skidding machine fitted with a winch in machine assisted tree felling | Level 3 | 2 Credits |
| 117076 | Prepare, operate and maintain a tractor in a non-production situation | Level 2 | 3 Credits |
| 117077 | Prepare anchors, rig intermediate supports, tailtrees & a tower and set up working cables for a cable yarding operation | Level 3 | 15 Credits |
| 117078 | Demonstrate knowledge of cable yarder extraction | Level 2 | 2 Credits |
| 117079 | Identify, explain and demonstrate standard safety procedures during active wildfire suppression | Level 1 | 2 Credits |
| 117080 | Extract timber to a landing using a cable yarder in a production situation | Level 3 | 10 Credits |
| 117081 | Choke and dechoke timber during extraction with a cable yarder in a production situation | Level 2 | 3 Credits |
| 117082 | Contribute to the suppression of wildfires at basic fire-fighting level | Level 1 | 2 Credits |
| 117083 | Extract timber to a landing using a tractor fitted with a skidding attachment in a production situation | Level 3 | 12 Credits |
| 117084 | Extract and transport timber using a tractor and trailer in a production situation | Level 3 | 12 Credits |
| 117085 | Conduct basic forestry map reading | Level 3 | 2 Credits |
| 117086 | Extract and transport timber using a tractor and trailer fitted with a self-loading crane in a production situation | Level 4 | 25 Credits |
| 117192 | Spray and/or label bulk bins, boxes and/or pallets | Level 1 | 5 Credits |
| 117193 | Manufacture bulk bins, boxes and/or pallets | Level 1 | 10 Credits |
| 117194 | Inspect and repair bulk bins and/or pallets | Level 1 | 10 Credits |
| 117195 | Fill charcoal and or briquette bag | Level 2 | 10 Credits |
| 117196 | Fire kilns and chimneys | Level 4 | 30 Credits |
| 117197 | Operate boiler, dryer and mixer | Level 2 | 5 Credits |
| 117198 | Receive, open and decant polybags | Level 1 | 5 Credits |
| 117199 | Load and offload kilns | Level 2 | 10 Credits |
| 117200 | Supervise loading of container | Level 3 | 25 Credits |
| 117201 | Sew crepe | Level 2 | 10 Credits |
| 117202 | Stack, load and palletise bags of charcoal and/or briquettes | Level 3 | 15 Credits |
| 117203 | Issue starch | Level 1 | 5 Credits |
| 117204 | Weigh and check-weigh bags | Level 2 | 15 Credits |
| 117205 | Plaster and seal kilns | Level 3 | 10 Credits |
| 117206 | Fold, cut and fill bags | Level 1 | 5 Credits |
| 117207 | Receive, offload, store and prepare for infeed of timber into the fibreboard and chipboard plant | Level 2 | 18 Credits |
| 117208 | Operate flaker in the chipboard manufacturing process | Level 2 | 18 Credits |
| 117209 | Control and monitor mat formation in the fibreboard and chipboard manufacturing process | Level 3 | 20 Credits |
| 117210 | Prepare dry flakes in the chipboard manufacturing process | Level 2 | 20 Credits |
| 117211 | Receive, store and test bulk chemicals in the fibreboard and chipboard manufacturing process | Level 2 | 10 Credits |
| 117212 | Load mat and press board in the chipboard manufacturing process | Level 3 | 15 Credits |
| 117213 | Monitor trimming and quality of fibreboard and chipboard after the pressing process | Level 2 | 15 Credits |
| 117214 | Operate sanding process in the fibreboard and chipboard process | Level 3 | 12 Credits |
| 117216 | Store melamine papers in the melamine faced board manufacturing process | Level 2 | 8 Credits |
| 117217 | Grade product in the fibreboard, chipboard manufacturing process | Level 2 | 10 Credits |
| 117218 | Load press board in the melamine faced board manufacturing process | Level 3 | 15 Credits |
| 117219 | Assure quality in the fibreboard and chipboard manufacturing process | Level 4 | 20 Credits |
| 117220 | Lay-up paper in the melamine faced board manufacturing process | Level 2 | 10 Credits |
| 117221 | Grade product in melamine faced board manufacturing process | Level 2 | 8 Credits |
| 117222 | Demonstrate understanding of basic production operations in a wood products environment | Level 1 | 10 Credits |
| 117223 | Wash chips in the fibreboard manufacturing process | Level 2 | 5 Credits |
| 117224 | Dry and store fibre in the fibreboard process | Level 3 | 10 Credits |
| 117225 | Perform basic lubrication in wood products production plant | Level 2 | 15 Credits |
| 117226 | Keep work area and equipment clean and safe in a wood products plant | Level 1 | 5 Credits |
| 117227 | Control production in relevant work areas in wood products plant | Level 4 | 15 Credits |
| 117228 | Perform manual handling in a wood products plant | Level 1 | 10 Credits |
| 117229 | Manage work force in relevant work areas in wood products environment | Level 4 | 15 Credits |
| 117230 | Operate machinery in a wood products environment | Level 2 | 11 Credits |
| 117231 | Demonstrate understanding of details of equipment, processes and procedures in a wood products plant | Level 2 | 15 Credits |
| 117232 | Conduct routine maintenance in relevant work areas in wood products environment | Level 4 | 15 Credits |
| 117233 | Demonstrate knowledge and understanding of the structure of wood and how this relates to its appearance, strength, and water retention in a wood products environment | Level 4 | 15 Credits |
| 117234 | Operate bar machine to form outer boxes | Level 2 | 10 Credits |
| 117235 | Demonstrate knowledge and understanding of the influence of wood structure, its properties and production factors on quality in a wood products environment | Level 4 | 15 Credits |
| 117236 | Operate match skillet printing machine | Level 2 | 9 Credits |
| 117237 | Operate machine to form inner boxes | Level 2 | 5 Credits |
| 117238 | Prepare impregnation solution | Level 1 | 4 Credits |
| 117239 | Supply ignition paint and pack skillets | Level 1 | 3 Credits |
| 117240 | Prepare ignition paint | Level 2 | 10 Credits |
| 117242 | Lay-up and lace veneer | Level 1 | 4 Credits |
| 117243 | Control application of match head composition | Level 3 | 16 Credits |
| 117245 | Apply ignition paint onto skillets | Level 1 | 4 Credits |
| 117246 | Operate wrapping machine | Level 2 | 10 Credits |
| 117247 | Prepare and mix match head composition | Level 3 | 15 Credits |
| 117248 | Operate peeling machine | Level 1 | 10 Credits |
| 117249 | Transfer composition from the compo room to vpo storage pots and supply to vpo on demand (side pots) | Level 1 | 4 Credits |
| 117250 | Ensure VPO box band cleats are full for production | Level 1 | 4 Credits |
| 117251 | Ensure continuous supply of quality match boxes to wrapping process | Level 1 | 4 Credits |
| 117252 | Maintain supply line of matchboxes to vat machine | Level 1 | 4 Credits |
| 117253 | Ensure continuous supply of quality matchboxes to wrapping process | Level 2 | 4 Credits |
| 117254 | Ensure continuous flow of inner and outer boxes for VPO machine | Level 1 | 4 Credits |
| 117255 | Collect and prepare wattle bark and "spents" for laboratory analysis | Level 1 | 12 Credits |
| 117256 | Supervise the wattle bark chopping operation | Level 3 | 20 Credits |
| 117257 | Supply wattle bark to the bark chopping machine | Level 1 | 12 Credits |
| 117258 | Operate and control the leaching process | Level 3 | 20 Credits |
| 117259 | Operate a wattle bark chopper machine | Level 2 | 16 Credits |
| 117260 | Assist in the leaching process | Level 3 | 20 Credits |
| 117261 | Demonstrate an understanding of timber roof truss manufacturing environment | Level 1 | 10 Credits |
| 117262 | Monitor drying and polishing process | Level 1 | 10 Credits |
| 117263 | Set jig, assemble, press, handle and store nail plated timber roof trusses | Level 3 | 20 Credits |
| 117264 | Identify, collect and move timber for roof truss manufacturing | Level 2 | 15 Credits |
| 117265 | Debark timber | Level 1 | 5 Credits |
| 117266 | Manage health and safety measures in relevant workplace in timber roof truss plant | Level 4 | 15 Credits |
| 117267 | Receive, sort and store incoming material into grades and sizes in a roof truss manufacturing environment | Level 2 | 15 Credits |
| 117268 | Cut poplar and pine logs into billets | Level 1 | 7 Credits |
| 117270 | Inspect and quality assure timber roof truss products and documentation | Level 4 | 20 Credits |
| 117271 | Load and off-load trusses and auxiliary material and all other hardware products | Level 3 | 20 Credits |
| 117272 | Cut and prepare timber for roof truss assembly | Level 3 | 20 Credits |
| 117273 | Manage work force in relevant work areas in wood preservation plant | Level 4 | 15 Credits |
| 117275 | Apply quality control in the wood preservation plant | Level 3 | 10 Credits |
| 117276 | Receive, sort and store incoming material into grades and sizes in a wood preservation plant | Level 2 | 15 Credits |
| 117277 | Manage classification and grading of poles and timber for wood preservation | Level 3 | 5 Credits |
| 117278 | Control process of treating wood with wood preservative | Level 3 | 10 Credits |
| 117279 | Control production process to produce debarked and seasoned poles | Level 3 | 10 Credits |
| 117280 | Manage pole peeling operation for wood preservation | Level 3 | 5 Credits |
| 117281 | Assist with the setting up and operation of the log yard of a wood preservation plant | Level 2 | 15 Credits |
| 117282 | Demonstrate knowledge and understanding of the structure of wood and how it relates to its appearance, strength, and water retention | Level 3 | 15 Credits |
| 117283 | Manage debarking of poles and logs for wood preservation | Level 3 | 5 Credits |
| 117284 | Control veneer/ plywood/ block board grading process in veneer/ plywood/ block board plant | Level 3 | 20 Credits |
| 117285 | Control receipt of incoming material (poles and/or sawn lumber) for wood preservation process | Level 3 | 5 Credits |
| 117286 | Set up and operate glue mixing, handling and storage facilities in dry processing area of veneer / plywood / block board plant | Level 3 | 10 Credits |
| 117287 | Demonstrate understanding of basics of veneer/plywood/block board operation | Level 1 | 10 Credits |
| 117288 | Grade Veneer/ Plywood/ Block board in veneer/ Plywood/ Block board plant | Level 2 | 20 Credits |
| 117289 | Set up and operate pressing facilities in dry processing area of veneer / plywood / block board plant | Level 3 | 10 Credits |
| 117290 | Set up and operate sanding facilties in the dry processing area of veneer / plywood / block board plant | Level 3 | 10 Credits |
| 117291 | Keep work area clean in a veneer/plywood/block board plant | Level 1 | 10 Credits |
| 117292 | Set up and control wet/dry hogging production facilities in wet/dry processing area of a veneer / plywood / block board plant | Level 3 | 10 Credits |
| 117293 | Sort and stack graded Veneer/ Plywood/ Block Board in Veneer/ Plywood/ Block Board plant | Level 1 | 5 Credits |
| 117294 | Perform manual handling in veneer/plywood/block board plant | Level 1 | 10 Credits |
| 117295 | Set up and operate board edging and squaring facilties in the dry processing area of veneer / plywood / block board plant | Level 3 | 5 Credits |
| 117296 | Demonstrate understanding of details of equipment, processes and procedures in the finishing processing facilities within a wood products plant | Level 2 | 15 Credits |
| 117297 | Demonstrate understanding of details of equipment, processes and procedures in the wet processing area within a wood products plant | Level 2 | 15 Credits |
| 117298 | Set up and operate board cross-cutting / trimming facilities in the dry processing area of veneer / plywood / block board plant | Level 3 | 5 Credits |
| 117299 | Demonstrate understanding of details of equipment, processes and procedures in the pressing facilities within a wood products plant | Level 2 | 15 Credits |
| 117300 | Perform basic lubrication in relevant workplace in veneer/plywood/block board plant | Level 2 | 10 Credits |
| 117301 | Demonstrate understanding of details of equipment, processes and procedures in the upgrading processing area within a wood products plant | Level 2 | 15 Credits |
| 117302 | Set up and operate log handling, sorting and storage facilities (log yard / deck) in wet processing area of veneer/plywood/block board plant | Level 3 | 15 Credits |
| 117303 | Assist with the setting up and operation of the log yard of a veneer/plywood/block board plant | Level 2 | 10 Credits |
| 117304 | Manage production in revelent workplace in the Veneer/ Plywood and Block Board industry | Level 4 | 15 Credits |
| 117305 | Set up and operate peeling/ slicing facilities in wet processing area of veneer / plywood / block board plant | Level 3 | 10 Credits |
| 117306 | Manage workforce in relevant workplace in Veneer/ Plywood/ Block Board plant | Level 4 | 15 Credits |
| 117307 | Assist with the setting up and operation of the peeling and drying processing facilities in the wet processing area of veneer/plywood/block board plant | Level 2 | 15 Credits |
| 117308 | Manage safety, health and environmental protection in relevant workplace in Veneer/ Plywood/ Block Board plant | Level 4 | 15 Credits |
| 117309 | Control basic maintenance and lubrication programme in relevant workplace in veneer/plywood/block board plant | Level 3 | 15 Credits |
| 117310 | Set up and operate drying facilities in wet processing area of veneer / plywood / block board plant | Level 3 | 10 Credits |
| 117311 | Set up and operate log debarking and conditioning facilities in wet processing area of veneer/plywood/block board plant | Level 3 | 5 Credits |
| 117312 | Set up and operate veneer upgrading processing facilities in dry processing area of veneer/plywood/block board plant | Level 3 | 10 Credits |
| 117605 | Demonstrate understanding of details of equipment, processes and procedures in saw doctor shop in lumber mill | Level 1 | 15 Credits |
| 123130 | Demonstrate knowledge of key elements of commercial forestry | Level 1 | 2 Credits |
| 123131 | Plant plantation trees | Level 1 | 1 Credits |
| 123132 | Eradicate weeds manually in a commercial environment | Level 1 | 1 Credits |
| 123133 | Prepare planting site using hand tools | Level 1 | 1 Credits |
| 123134 | Apply herbicides to noxious weeds | Level 1 | 3 Credits |
| 123135 | Apply pesticides before or after planting | Level 1 | 1 Credits |
| 123136 | Describe the environmental impacts of commercial forestry | Level 1 | 2 Credits |
| 123137 | Describe and explain basic safety requirements in a forestry environment | Level 1 | 2 Credits |
| 123138 | Operate and maintain a motorised water pump | Level 2 | 2 Credits |
| 123139 | Apply fertiliser before and after planting | Level 1 | 1 Credits |
| 123140 | Clear plantation waste by burning | Level 1 | 1 Credits |
| 123141 | Debranch trees using an axe/hatchet | Level 1 | 1 Credits |
| 123142 | Prune for access in Commercial Forestry and to ensure correct stem form | Level 2 | 2 Credits |
| 123143 | Reduce coppice in gum plantations | Level 1 | 2 Credits |
| 123145 | Select and space trees in commercial wattle forests | Level 1 | 2 Credits |
| 123146 | Debark trees with a hatchet and prepare bark bundles in a wattle operation | Level 1 | 2 Credits |
| 123148 | Load and refuel fixed wing aircraft for wildfire suppression | Level 2 | 2 Credits |
| 123149 | Communicate using a two-way radio system | Level 2 | 2 Credits |
| 123230 | Perform administrative functions during wildfire suppression | Level 4 | 4 Credits |
| 123231 | Manage a crew during wildfire suppression | Level 4 | 7 Credits |
| 123232 | Lead a strike attack force to contain or extinguish a wildfire | Level 4 | 4 Credits |
| 123233 | Cut felled timber using a chainsaw and maintain chainsaw | Level 2 | 4 Credits |
| 123234 | Control activities at an airstrip during aerial wildfire suppression | Level 3 | 2 Credits |
| 123235 | Manage a controlled burn | Level 4 | 4 Credits |
| 123236 | Perform fire-lookout duties | Level 2 | 2 Credits |
| 123237 | Control forestry work team activities | Level 4 | 5 Credits |
| 123238 | Conduct maintenance on herbicide applicators | Level 2 | 2 Credits |
| 123239 | Manage a chemical store on a forestry plantation | Level 2 | 4 Credits |
| 123240 | Demonstrate knowledge of silviculture in commercial forestry | Level 4 | 20 Credits |
| 123241 | Select and mark trees for thinning in commercial forestry | Level 2 | 4 Credits |
| 123242 | Organize forestry work team activities | Level 3 | 5 Credits |
| 123243 | Operate brush-cutters in commercial forestry | Level 2 | 5 Credits |
| 123244 | Operate an electronic fire surveillance facility | Level 4 | 6 Credits |
| 123245 | Scale tree lengths into log assortments in a production situation | Level 2 | 2 Credits |
| 263654 | Clean saws and cutters returned for maintenance in Saw shop of Lumber Mill | Level 1 | 5 Credits |
| 263655 | Move and transport saws and cutters between saw shop and processing machines/areas in a Lumber Mill | Level 1 | 5 Credits |
| 263674 | Describe drying defects occurring in wood, and methods to use in minimizing them | Level 2 | 5 Credits |
| 263675 | Operate and monitor the green chip production facilities in green timber processing area of Lumber Mill | Level 2 | 3 Credits |
| 263676 | Prepare and load lumber drying kiln | Level 1 | 5 Credits |
| 263677 | Weld and braze saw blades using oxygen/acetylene during maintenance in saw shop of lumber mill | Level 2 | 10 Credits |
| 263678 | Manually set and sharpen springset saw blades used in a Lumber Mill | Level 1 | 5 Credits |
| 263679 | Operate green lumber crosscutting/trimming facilities in green timber processing area of Lumber Mill | Level 1 | 5 Credits |
| 263680 | Manage maintenance of all machines, tools and equipment used for Saw and cutter maintenance in Lumber Mill | Level 4 | 5 Credits |
| 263681 | Handle, mix and apply adhesive glue manually in finger-jointing and laminating facilities of Lumber Mill | Level 1 | 5 Credits |
| 263682 | Inspect used saw blades before and after servicing in Saw shop of Lumber Mill | Level 1 | 2 Credits |
| 263683 | Describe basic principles of a Lumber Kiln drying schedule | Level 2 | 7 Credits |
| 263684 | Explain Lumber Milling Industry activities in terms of processes, production stages and equipment | Level 1 | 4 Credits |
| 263685 | Perform elementary Lumber Milling operations | Level 1 | 5 Credits |
| 263686 | Identify the mechanical makeup and the function of major equipment needed in a work area | Level 1 | 4 Credits |
| 263687 | Operate green lumber edging in green timber processing area of Lumber Mill | Level 2 | 5 Credits |
| 263688 | Optimize machine productivity in Lumber Mill | Level 4 | 5 Credits |
| 263689 | Stack lumber for kiln drying | Level 1 | 3 Credits |
| 263690 | Sort, feed and record logs in the log yard of a Lumber Mill | Level 1 | 4 Credits |
| 263691 | Set and sharpen swaged tooth saw blades used in the lumber mill | Level 2 | 5 Credits |
| 263692 | Control green chip production facilities in green timber processing area of Lumber Mill | Level 3 | 5 Credits |
| 263693 | Select, prepare, place and use samples in Lumber drying process | Level 2 | 5 Credits |
| 263694 | Maintain wide blade bandsaw wheel faces on bandsaws machines used in Lumber Mill | Level 4 | 2 Credits |
| 263695 | Perform routine maintenance on Saw shop machines and tools in Lumber Mill | Level 1 | 2 Credits |
| 263696 | Kiln trolley with load of dried lumber from drying kiln to cooling shed/facilities | Level 2 | 2 Credits |
| 263714 | Level and tension circular saw blades used in Lumber Mill | Level 3 | 8 Credits |
| 263715 | Sharpen and set up knives and profile cutters used in Lumber Mill | Level 2 | 4 Credits |
| 263716 | Hang frame saw blades and set up frame saw machine used in Lumber Mill | Level 2 | 5 Credits |
| 263717 | Design and make tooth profile templates for saws and cutters used in machines in Lumber Mill | Level 4 | 4 Credits |
| 263718 | Control lumber grading process in Lumber Mill | Level 3 | 12 Credits |
| 263719 | Describe properties of wood related to drying | Level 3 | 8 Credits |
| 263720 | Describe Lumber drying kiln types, their construction materials and auxiliary equipment | Level 3 | 5 Credits |
| 263721 | Operate log debarking facilities in green timber processing area of Lumber Mill | Level 2 | 5 Credits |
| 263722 | Demonstrate understanding of technology applicable to use in lumber mill of grinding wheels made from specialised material | Level 3 | 4 Credits |
| 263723 | Maintain and set up cutter blocks with profiled and disposable cutters for machines used in Lumber Mill | Level 2 | 3 Credits |
| 263724 | Set up circular saw blade(s) in machines used for processing timber in lumber mill | Level 2 | 2 Credits |
| 263725 | Maintain and set up chipper knives and anvils in chipper machines in Lumber Mill | Level 3 | 5 Credits |
| 263726 | Produce finger-jointed lumber in Lumber Mill | Level 2 | 10 Credits |
| 263734 | Weld saw Blades using Metal Inert Gas (MIG) and Tungsten Inert Gas (TIG), in Saw Shop of Lumber Mill | Level 2 | 5 Credits |
| 263735 | Operate secondary log breakdown facilities in green timber processing area of Lumber Mill | Level 2 | 10 Credits |
| 263736 | Control log handling, sorting and storage facilities (log yard) in green timber processing area of lumber mill | Level 3 | 5 Credits |
| 263754 | Control lumber drying process in Lumber Mill | Level 3 | 5 Credits |
| 263755 | Use and care for grinding wheels, blade, knife and cutter, maintenance in saw doctor shop of lumber mill | Level 2 | 5 Credits |
| 263756 | Operate automatic satellite tipping and profile grinding machines in saw shop of lumber mill | Level 3 | 10 Credits |
| 263757 | Describe kiln types, construction materials for kilns, and auxiliary equipment | Level 2 | 5 Credits |
| 263758 | Apply trigonometry equations to calculate pitch, height and span | Level 4 | 4 Credits |
| 263759 | Dry Lumber in Lumber drying kiln applying appropriate drying schedule with all possible stages | Level 3 | 15 Credits |
| 263760 | Demonstrate understanding of the principles of Silviculture and fire protection | Level 4 | 5 Credits |
| 263761 | Level and tension wide bandsaw blades in saw shop of Lumber Mill | Level 3 | 8 Credits |
| 263762 | Apply knowledge and understanding of truss manufacturing in recommendations made for roof design | Level 4 | 5 Credits |
| 263763 | Level and tension frame saw blades use in Lumber Mill | Level 3 | 8 Credits |
| 263764 | Estimate the quantity of material required for a roof design | Level 4 | 5 Credits |
| 263765 | Set up wide blade bandsaw machine and its log carriage used in lumber mill | Level 3 | 4 Credits |
| 263774 | Maintain and set up Narrow Band Saw Blade(s) used on bandsaws in Lumber Mill | Level 3 | 2 Credits |
| 263775 | Demonstrate an understanding of the impact of wind on roof engineering design | Level 4 | 10 Credits |
| 263776 | Demonstrate knowledge of industry legislation, the various stakeholders, their responsibilities, and compliance requirements | Level 4 | 10 Credits |
| 263777 | Apply knowledge and understanding of roof terminology and concepts | Level 4 | 4 Credits |
| 263794 | Apply knowledge and understanding of roof erection document requirements | Level 4 | 3 Credits |
| 263795 | Apply knowledge and understanding of structural material in the roofing industry | Level 4 | 6 Credits |
| 263814 | Explain the dynamic interaction of the various elements to a functional roof structure | Level 4 | 4 Credits |
| 263815 | Demonstrate understanding of the principles of Forest Engineering practices | Level 4 | 5 Credits |
| 263816 | Cost harvesting and transport operations | Level 4 | 4 Credits |
| 263817 | Cost Silviculture operations | Level 4 | 4 Credits |
| 263818 | Recommend material best suited for roof design | Level 4 | 5 Credits |
| 263819 | Apply knowledge of manual and mechanized harvesting and transport systems | Level 4 | 5 Credits |
| 263834 | Supervise aerial extraction systems and fire protection | Level 4 | 3 Credits |
| 263835 | Supervise maintenance of forest roads | Level 4 | 3 Credits |
| 263836 | Identify possible community initiatives | Level 4 | 5 Credits |
| 263837 | Control basic maintenance and lubrication programme in relevant workplace in Lumber Mill | Level 3 | 15 Credits |
| 263838 | Prepare an operational Silviculture plan | Level 4 | 3 Credits |
| 263839 | Demonstrate understanding of influence of wood structure and properties, and certain production factors on wood quality | Level 4 | 15 Credits |
| 263840 | Demonstrate knowledge of nursery practices including seedling | Level 4 | 3 Credits |
| 263841 | Identify the structural material specification for a roof design | New Level Assignment Pending | 4 Credits |
| 263842 | Demonstrate an understanding of a roofing business environment | New Level Assignment Pending | 10 Credits |
| 264794 | Operate primary log breakdown facilities in green timber processing area of lumber mill | Level 2 | 10 Credits |
| 264795 | Operate conversion equipment used for surfacing and thicknessing products in the dry timber processing area of lumber mill | Level 2 | 10 Credits |
| 264796 | Manage production in the relevant workplace in lumber mill | Level 4 | 10 Credits |
| 264797 | Operate conversion equipment used to profile cross section of products in the dry timber processing area of lumber mill | Level 2 | 10 Credits |
| 264798 | Sort and stack graded lumber in a lumber mill | Level 1 | 4 Credits |
| 264814 | Operate conversion equipment for recovering narrower and thinner and shorter length products in dry timber processing area of lumber mill | Level 1 | 7 Credits |
| 264815 | Control Dry Mill facilities in dry timber processing area of lumber mill | Level 3 | 5 Credits |
| 264816 | Produce laminated lumber in lumber mill | Level 2 | 10 Credits |
| 264835 | Explain and apply specific standards of lumber grading in a lumber mill | Level 2 | 12 Credits |
| 264836 | Control Wet Mill facilities in green timber processing area of lumber mill | Level 3 | 5 Credits |
| 376880 | Create fire awareness among communities | Level 4 | 4 Credits |
| 376881 | Demonstrate knowledge and understanding of a basic Incident Command System | Level 4 | 3 Credits |
| 376882 | Apply knowledge and understanding of fire behaviour to supervise a fire suppression team | New Level Assignment Pending | 8 Credits |
| 376883 | Communicate using a two-way radio system during wildfire suppression operations | Level 3 | 4 Credits |
| 376884 | Coordinate controlled burning operations in accordance with a fire prevention plan | Level 4 | 8 Credits |
| 376885 | Demonstrate knowledge and application of various safety regulations to fires | Level 4 | 8 Credits |
| 376886 | Manage a crew during a controlled burn | Level 4 | 8 Credits |
| 376900 | Conduct basic map reading | Level 3 | 3 Credits |
| 376901 | Supervise structure protection operations in the rural urban interface | New Level Assignment Pending | 8 Credits |
